|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
||
 |
|
|
Thread Tools | Search this Thread |
12th August 2009, 09:06 PM
|
#1 |
|
diyAudio Member
Join Date: Apr 2006
Location: Holland
|
NFB, how to implement here?
My 6L6 push pull amplifier is in need of some help in the low frequencies. Because gain is more than enough I was thinking of the implementation of negative feedback.
I don't recall the origin of the fase splitter (see below) but I'm scratching my head how to implement. The output transformer has a 500 ohm tab (besides 4, 8 and 16 ohm) which could be fed back over a resistor to the kathode of V1. Any suggestions? Thank you.
__________________
jaap |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How should I implement these... | flaevor | Subwoofers | 11 | 16th October 2010 08:35 PM |
| How many people implement switches? | westers151 | Everything Else | 14 | 11th March 2009 02:11 PM |
| How to implement DC protection in a BTL amp??? | Leolabs | Solid State | 1 | 9th April 2007 03:57 AM |
| How to implement synchronous clocking | regal | Digital Source | 2 | 20th August 2006 02:57 AM |
| does AES/EBU help if i implement reclock? | garbage | Digital Source | 44 | 15th September 2005 03:20 PM |
| New To Site? | Need Help? |
| Page generated in 0.05909 seconds (66.25% PHP - 33.75% MySQL) with 11 queries |
