|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
1st July 2009, 06:00 AM
|
#1 |
|
diyAudio Member
Join Date: Mar 2008
|
Hickok 533 / 600 settings for 6GM8 / ECC86
I have a 533 tester and a chart, but no settings for the 6GM8 / ECC86 tube. Settings I thought I found are a bit obscured and what I think they are, gives no reading at al with P4. Other roll charts, like for the 533A give settings and say only an English reading cam be made, but if I use those settings, the 2 tubes I have, one of which is unused, both come up as "bad" when P1 is pressed so I think those meter settings are wrong for this tester. Any help would be appreciated.
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| WTB: tubes: 6GM8 ECC86 | koolatron | Swap Meet | 4 | 26th April 2008 01:32 AM |
| Hickok TV-7A/U settings for 8417 tube? | GordonW | Tubes / Valves | 2 | 11th January 2008 06:28 PM |
| Hickok 800 settings | darryljoe | Tubes / Valves | 2 | 21st June 2007 04:42 PM |
| Hickok 600/605/800 settings? | lgo51 | Tubes / Valves | 1 | 3rd May 2002 03:18 AM |
| Hickok 539A settings | John S. | Tubes / Valves | 4 | 27th December 2001 03:16 AM |
| New To Site? | Need Help? |
