When you start a new thread, you have to claim that you tried searching which I am guessing is not the case here: http://www.diyaudio.com/forums/showthread.php?s=&threadid=145873
I've dealt with a couple of PCB companies.
Production quality, tight spacing stuff:
Quote PCB
At work we use Advanced Circuits, though, I haven't dealt with them personally:
Advanced Circuits
If you can live with the limited board area and options, Express PCB can be a good deal:
Express PCB
You have to use their (free) software, though. If you start looking at custom sized boards, you'd be better off going with other vendors (IMO).
A couple of weeks ago I just received about $200 worth of boards from Olimex. I really like their service and the price is right for low volume production or prototypes. They offer two standard board sizes - 10x16 cm (about 4x6 inches) and 20x32 cm (about 8x12 inches). You buy the board area do whatever you want with it (unlike many other companies). They are a bit limiting in terms of trace/space (min 8/8 mil) but for tube stuff that's hardly relevant. Olimex They accept Gerber files.
~Tom
Production quality, tight spacing stuff:
Quote PCB
At work we use Advanced Circuits, though, I haven't dealt with them personally:
Advanced Circuits
If you can live with the limited board area and options, Express PCB can be a good deal:
Express PCB
You have to use their (free) software, though. If you start looking at custom sized boards, you'd be better off going with other vendors (IMO).
A couple of weeks ago I just received about $200 worth of boards from Olimex. I really like their service and the price is right for low volume production or prototypes. They offer two standard board sizes - 10x16 cm (about 4x6 inches) and 20x32 cm (about 8x12 inches). You buy the board area do whatever you want with it (unlike many other companies). They are a bit limiting in terms of trace/space (min 8/8 mil) but for tube stuff that's hardly relevant. Olimex They accept Gerber files.
~Tom
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- pcb printing companies