Anyone compared electra-print SE:PP interstages to electra-print PSA-2 autoformers - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 11th June 2009, 05:39 PM   #1
zobsky is offline zobsky  India
diyAudio Member
zobsky's Avatar
Join Date: Mar 2002
Location: Dallas, Tx, USA
Default Anyone compared electra-print SE:PP interstages to electra-print PSA-2 autoformers

I have a pair of both and have built a (rather nice sounding) Push Pull D3A ->(interstage)->PP 2A3 ->fisher 800 6k6 OPT amplifier. I'm wondering if it's worth my while experimenting with the parafeed autoformer splitter.

Click the image to open in full size.
"Not everything that can be counted counts, and not everything that counts can be counted." - Albert Einstein
  Reply With Quote
Old 27th August 2016, 09:14 PM   #2
diyAudio Member
Join Date: Mar 2010
I have used both; 5842 ->(interstage)->PP 6B4G ->Sansui 1000A 6k6 OPT . I prefer the interstage, it is more neutral, but the autoformer is not bad at all. The autoformer is in the amp now, the interstage is going into a PP 300B project.

Autoformer is cheap enough to play with, why not?

I know, this is a very old post, but I just came across it, and the OP is still active...
  Reply With Quote
Old 27th August 2016, 10:09 PM   #3
HeyBill is offline HeyBill  United States
diyAudio Member
Join Date: Nov 2010
Location: California
I've built two of the Electra print PVA setups for my stereo system. I use one unit between my OPPO 105 and a pair of 6a3 a2 mono blocks that were listed on Jack's site a few years ago. Also used his iron. The PVA works well for me.
What's that smell?
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Electra Print -passive volume preamp. felixx Solid State 9 28th February 2016 04:27 PM
Electra-Print 300BDRD Salsero Tubes / Valves 9 11th July 2009 06:37 PM
Electra Print & SAC ( Silk )? Mario Pankov Tubes / Valves 0 14th May 2009 05:26 AM
FS: Electra-Print 10H choke 5u4 Swap Meet 2 28th May 2008 02:41 PM
Electra-Print transformer based passive preamp. franjy Parts 0 19th September 2005 03:35 PM

New To Site? Need Help?

All times are GMT. The time now is 10:29 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2