Input impedance of tubelab simple se

pforeman · 24th May 2009, 12:04 PM

Hi could anyone tell me what the input impedance is for the tubelab simple se?
Also can you just measure it with an ohm meter?
Thanks
Paul Foreman

Ty_Bower · 24th May 2009, 12:42 PM

If you build it without a volume pot on the inputs, the input impedance will be the value of R11 (or R21), which is 220K.

24th May 2009, 12:04 PM	#1
pforeman diyAudio Member Join Date: Aug 2008	Input impedance of tubelab simple se Hi could anyone tell me what the input impedance is for the tubelab simple se? Also can you just measure it with an ohm meter? Thanks Paul Foreman

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tubelab Simple P-P	booangler	Tubelab	558	23rd April 2012 12:10 AM
Input impedance of tubelab simple se	pforeman	Full Range	2	24th May 2009 05:10 AM
Input impedance for Simple SE?	jrn77478	Tubes / Valves	1	16th January 2009 04:47 PM
Second Tubelab Simple SE board done	budmaestro	Tubes / Valves	0	24th July 2008 12:18 AM
New SET: JE labs simple 45 or tubelab SE?	cwujek	Tubes / Valves	14	27th November 2007 04:15 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

24th May 2009, 12:42 PM	#2
Ty_Bower diyAudio Member Join Date: Mar 2007 Location: Newark, DE	If you build it without a volume pot on the inputs, the input impedance will be the value of R11 (or R21), which is 220K.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)