Electra Print & SAC ( Silk )? - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 14th May 2009, 05:26 AM   #1
diyAudio Member
Join Date: Aug 2007
Location: Sofia
Send a message via Skype™ to Mario Pankov
Default Electra Print & SAC ( Silk )?


I am ready to move on with my KT88 SE project and I am up to choose the transformers for it.

I was looking at something at the low hi-end range, not as expensive as Tango and Tribute but close to them with very good performance. After I looked at the forums I came up to two possibilities - Silk output transformer S-325 made by SAC at the cost of about 196 euro for a pair ( if ordered directly from him ) and Mr. Elliano`s Electra Print transformers at the cost of 251 euro for a pair ( no shipping charges are included in both prices ). I had a short communication with Jack and I have to say he is a great man. I also know Kittipol from SAC as we have already ordered his transformers and they were great.

My question is: How do the Electra Print SE transformers compare to the Silk transformers? ( I would appreciate If anybody has compared both the Electra Print and the Silk S-325 )

  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Anyone compared electra-print SE:PP interstages to electra-print PSA-2 autoformers zobsky Tubes / Valves 2 27th August 2016 10:09 PM
Electra Print -passive volume preamp. felixx Solid State 9 28th February 2016 04:27 PM
Electra-Print 300BDRD Salsero Tubes / Valves 9 11th July 2009 06:37 PM
FS: Electra-Print 10H choke 5u4 Swap Meet 2 28th May 2008 02:41 PM
Electra-Print transformer based passive preamp. franjy Parts 0 19th September 2005 03:35 PM

New To Site? Need Help?

All times are GMT. The time now is 01:53 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2