|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
|
||
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Apr 2009
|
I have a Strauss 60. Old p/p amp. 2 x el34, 3 x 12ax7. Huge p/t and o/t, big enough to a power small town. I replaced the caps etc as it was very dangerous, the two big cans were isolated fom the chassis and they were conducting the full load thru their outsides..on purpose. There is plenty of voltage were it should be, the valves are fine, But no sound, well very little volume.Replaced volume pot. It also has a strange bias set up, with pin 8 running 2 parralel caps, a zener diode and a fuse all in parralel to earth. I have never seen this before. I need help. What could be the cause of the lack of volume
|
|
|
|
|
#2 |
|
Tinkerer
diyAudio Member
|
Schematic?
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Weird | e_fortier | Class D | 3 | 4th July 2008 02:16 AM |
| Weird cat experiments | poobah | The Lounge | 10 | 27th July 2006 12:53 AM |
| Here is a weird one | mashaffer | Solid State | 2 | 26th March 2006 01:23 AM |
| weird | karma | Everything Else | 1 | 26th May 2004 04:10 AM |
| weird | karma | Everything Else | 8 | 6th May 2003 11:42 AM |
| New To Site? | Need Help? |
| Page generated in 0.07995 seconds (71.31% PHP - 28.69% MySQL) with 10 queries |