What circuit and tube to be used

ckwong99 · 6th March 2009, 04:34 PM

Hi All,

Can anyone give me a suggestion about my second hand o/p transformer is single-ended around 20W and Z=1K , which kind of power tube should be used and what kind of circuit suit for it ?

CK

firechief · 6th March 2009, 05:27 PM

HI CK
Please help me by providing the specifications for the transformer. Also Manufacturers name, model number. I need more information to get started. With this information provided you are much more likely to get suggestions. Also good luck with the project.
Bob

wakibaki · 6th March 2009, 05:43 PM

Are you thinking about an instrument (guitar) amplifier?

Most people prefer matched O/P transformers for Hi-Fi.

w

ckwong99 · 7th March 2009, 01:14 AM

Thanks to your questions.

Sorry, they are second hand o/p dismantle from PWR amp also they are not a commercial product. Seems a DIY thing made in China / Taiwan with an external iron box enclosed.

I want to make a single-ended PWD amp around 10W.

There is some description

Primary :
Red color wire connected to transformer with "B" marking
Yellow wire connected to transformer with "P" marking

Transformer body :
Have string "LM-1K-25F" & Zp : 1Kohm

Secondary :
Have 4 wire marked as 0 / 4 / 8 / 16 ohm

azazello · 7th March 2009, 12:48 PM

Hi!
If You'l build SE aprox. 8-10 wts, You can use russian 6S41S - Ri=300 ohm /6С41С/ with Ia= 100-120 ma, and wire diameter primary coil must be aprox. 0.3 mm!!....Or
2 parallel 6S19P - Ri=150 ohm /6С19П/, with Ia=60 ma each,
or 2 par. ED8000 - http://www.tubedepot.com/nos-ed8000.html
Preamp. EF861, E180F. If You interest, I can give You a schematic - 6S41S & EF861 !
But first, You must measure wire diameter!!

ckwong99 · 7th March 2009, 02:13 PM

However, I had already bought this pair of output transformer. Not sure they suit for your power amp circuit ?

This is there descriprtion

Primary :
Red color wire connected to transformer with "B" marking
Yellow wire connected to transformer with "P" marking

Transformer body :
Have string "LM-1K-25F" & Zp : 1Kohm

Secondary :
Have 4 wire marked as 0 / 4 / 8 / 16 ohm

azazello · 7th March 2009, 02:39 PM

You can try 2 of ED 8000 or 6S19P, Ia=80-90 ma per channel, and EF861.
It's will be OK.

ckwong99 · 7th March 2009, 03:00 PM

can you send their 8000 and 6S19P circuit for my reference ?

azazello · 7th March 2009, 08:26 PM

OK! I will....
You also can use 6P45S /6П45С/ - Ri=200 ohm, Ia=80-90 ma.
Very linear tube for TV and Hi-End !

azazello · 8th March 2009, 05:09 PM

You have an Email....

6th March 2009, 04:34 PM	#1
ckwong99 diyAudio Member Join Date: May 2005 Location: HK	What circuit and tube to be used Hi All, Can anyone give me a suggestion about my second hand o/p transformer is single-ended around 20W and Z=1K , which kind of power tube should be used and what kind of circuit suit for it ? CK

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need opinions about this tube circuit	gaetan8888	Tubes / Valves	27	12th July 2009 11:36 AM
Tube audio circuit analysis	lowtherdream	Tubes / Valves	4	22nd March 2009 05:20 PM
How Would You Change This Soildstate Circuit To Tube	prorms	Tubes / Valves	5	21st October 2007 10:01 PM
Dead simple tube circuit	mrjcfreak	Tubes / Valves	1	29th June 2004 09:31 PM
Tube guitar amplifier circuit	Paulo	Tubes / Valves	8	6th August 2003 05:09 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

6th March 2009, 05:27 PM	#2
firechief diyAudio Member Join Date: Sep 2008 Location: Near Seattle Wa	HI CK Please help me by providing the specifications for the transformer. Also Manufacturers name, model number. I need more information to get started. With this information provided you are much more likely to get suggestions. Also good luck with the project. Bob

6th March 2009, 05:43 PM	#3
wakibaki Banned Join Date: Jan 2008 Blog Entries: 2	Are you thinking about an instrument (guitar) amplifier? Most people prefer matched O/P transformers for Hi-Fi. w

7th March 2009, 01:14 AM	#4
ckwong99 diyAudio Member Join Date: May 2005 Location: HK	Thanks to your questions. Sorry, they are second hand o/p dismantle from PWR amp also they are not a commercial product. Seems a DIY thing made in China / Taiwan with an external iron box enclosed. I want to make a single-ended PWD amp around 10W. There is some description Primary : Red color wire connected to transformer with "B" marking Yellow wire connected to transformer with "P" marking Transformer body : Have string "LM-1K-25F" & Zp : 1Kohm Secondary : Have 4 wire marked as 0 / 4 / 8 / 16 ohm

7th March 2009, 12:48 PM	#5
azazello diyAudio Member Join Date: Aug 2008 Location: Bulgaria	Hi! If You'l build SE aprox. 8-10 wts, You can use russian 6S41S - Ri=300 ohm /6С41С/ with Ia= 100-120 ma, and wire diameter primary coil must be aprox. 0.3 mm!!....Or 2 parallel 6S19P - Ri=150 ohm /6С19П/, with Ia=60 ma each, or 2 par. ED8000 - http://www.tubedepot.com/nos-ed8000.html Preamp. EF861, E180F. If You interest, I can give You a schematic - 6S41S & EF861 ! But first, You must measure wire diameter!!

7th March 2009, 02:13 PM	#6
ckwong99 diyAudio Member Join Date: May 2005 Location: HK	However, I had already bought this pair of output transformer. Not sure they suit for your power amp circuit ? This is there descriprtion Primary : Red color wire connected to transformer with "B" marking Yellow wire connected to transformer with "P" marking Transformer body : Have string "LM-1K-25F" & Zp : 1Kohm Secondary : Have 4 wire marked as 0 / 4 / 8 / 16 ohm

7th March 2009, 02:39 PM	#7
azazello diyAudio Member Join Date: Aug 2008 Location: Bulgaria	You can try 2 of ED 8000 or 6S19P, Ia=80-90 ma per channel, and EF861. It's will be OK.

7th March 2009, 03:00 PM	#8
ckwong99 diyAudio Member Join Date: May 2005 Location: HK	can you send their 8000 and 6S19P circuit for my reference ?

7th March 2009, 08:26 PM	#9
azazello diyAudio Member Join Date: Aug 2008 Location: Bulgaria	OK! I will.... You also can use 6P45S /6П45С/ - Ri=200 ohm, Ia=80-90 ma. Very linear tube for TV and Hi-End !

8th March 2009, 05:09 PM	#10
azazello diyAudio Member Join Date: Aug 2008 Location: Bulgaria	You have an Email....

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)