Suggestions for RIAA preamp? - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 3rd March 2009, 04:12 PM   #1
diyAudio Member
coldcathode's Avatar
Join Date: Jan 2009
Default Suggestions for RIAA preamp?

After looking thru some of Broskie's stuff I came up with the attached schematic for a line stage. (my PC sound card had extremely low output).

Can anyone tell me what to expect for gain on this?

I was looking at his similar design Phono Stage, anyone have experience with any "Simple" Phono stages?

I would like to stay "Octal" but could also go with 9pins and switch up my schema to 6FQ7/6CG7. (more for looks and consistancy)

BTW MM cartridge in both my turntables.
Attached Images
File Type: jpg new preampjpg.jpg (65.8 KB, 573 views)
  Reply With Quote
Old 3rd March 2009, 04:57 PM   #2
diyAudio Member
Join Date: Jan 2009
you'll get about 20dB with that circuit (haven't checked though)

a good simple riaa could be thorsten's (not octal though) but sounds really good

for a simple octal try bob danialak's or .. what's his name, hager something. i'll see if i can find it, hold on ..
  Reply With Quote
Old 3rd March 2009, 04:59 PM   #3
diyAudio Member
Join Date: Jan 2009
octal riaa :

Wanted RIAA stage with 6SN7
  Reply With Quote
Old 3rd March 2009, 05:05 PM   #4
diyAudio Member
Join Date: Jan 2009
your linestage (or a similar setup) have been discussed a LOT here, search for Joel Tuna and the gentleman from Belgium ... fdegrove, i think
  Reply With Quote
Old 3rd March 2009, 05:45 PM   #5
diyAudio Member
coldcathode's Avatar
Join Date: Jan 2009
Default ADDITONAL ??? please look


I am pretty sure the Schematic is OK, just I am confused as to how to calc the gain since it is a screwy topology. Broskie's explanation was pretty clear as to the advantages but "thin" on the math.

I looked at the cornet but there are SO many poles in the B+ I am assuming it is part of the EQ network, Looks too complicated for what I am trying to do. (I have very little vinyl and play it rarely) I just have a lot of extra mA's in the PS for the preamp and figured I would put it to use.

Not to "HIJACK" my own thread but I have been pondering a question maybe this is an appropriate forum to ask it.

Here's the scenario:

I am laying out my next few projects based upon the eventual system configuration that I want to achieve. I am currently out of work so funds are limited but I have a LOT of free time.

I am preparing a "listening room" in my basement, which will also double as my home office and computer room.

Since I spend a LOT of time on the computer and love all kinds of music my collection of MP3's has grown to the point that I have needed to upgrade the hard drive 3 times (120+GB now).

I have a very nice sound card but it has VERY low output. Thus the need for the preamp even though my 6V6 PP "workhorse" amp has plenty of gain it still can't drive the power section to beyond about 1/2 full output.

So (after the long winded explanation) I would like to achieve the following.

Using the 6V6PP amp I already have (about 8W/Channel) and another PP amp (TBD) I would like to "Bi-Amp" my Yamaha's

I addition I would like to add a "subwoofer" or "bass channel" for this I will tackle the challenge of getting about 20 Watts from 829B's in SET. Since I plan for this to be about 140hz and down @ 6db/octave and most sound below 400 is non directional I plan for it to be "Mono" with a single driver.


I need to "SUM" the L/R channels for this "mono" LP filter.

Oops Forgot to mention I plan to also insert an "Active Tube Crossover" between the preamp and the power amps.

Maybe I am missing something but I can't get a "grasp" on how to sum the signals without messing with the "stereo" separation of the signals for the rest of the system.

IE simply "connecting" them together would work backwards also?
What I am getting at is I need some sort of "buffer" correct?

Any suggestions from anyone would be appreciated.
  Reply With Quote
Old 3rd March 2009, 07:38 PM   #6
diyAudio Member
Join Date: Jan 2009
no, the poles (LC & RC) are just part of the psu ripple rejection. the riaa takes part between the tubes. it's quite a simple circuit. i don't think you can do it more simple than that

lemme think about the rest of your questions ...
  Reply With Quote
Old 3rd March 2009, 07:42 PM   #7
diyAudio Member
Join Date: Jan 2009
you can easily calculate the gain of a grounded cathode design (with or without a cap) using this guide :
  Reply With Quote
Old 3rd March 2009, 07:48 PM   #8
diyAudio Member
Join Date: Jan 2009
why is the output from your soundcard so low? what make is it?

a SET is a poor choice for a dedicated subwoofer channel. a mono sub is a bad choice anyway (long thread in the loudspeaker forum right now, i think)

if you decide to do mono anyway, solid state is a good choice, don't be afraid

yes, you need to buffer before summing, or do a stereo sub filter and sum afterwords. what is your preamp/filter choice (or future idea)?
  Reply With Quote
Old 3rd March 2009, 07:52 PM   #9
diyAudio Member
Join Date: Jan 2009
here's a good thread on why not to use a mono sub (it' wasn't in the loudspeaker forum afterall, sorry). it's a mastering forum - those guys who use high end system to evaluate and/or tweak records before they're put out to the public :
  Reply With Quote
Old 3rd March 2009, 08:59 PM   #10
diyAudio Member
coldcathode's Avatar
Join Date: Jan 2009
After reading the post I came to a conclusion.

My initial theory is actually the CORRECT answer.

Here is how I got there.

I have read (can't remember where but published and reputable sources) that typical human hearing cannot differentiate sound sources below about 400hz this is also exponential to the octave so at 200hz were about 4 times less likely to identify the source location.
Example: Aside from left right front or back can you tell WHERE the "boom" of thunder came from? Maybe the "crack" (higher frequency) but the BOOM is hard to tell.

So making the assumption that the track was recorded and is being played back in "Acoustically perfect and identical rooms" (just to eliminate room acoustics) I see no reason why a "mono" sub woofer would be an issue. I agree with some that "summing" electrically the 2 channels will result in some "lost" information, ie something that "cancels" from L/R.

BUT, that would have to have been recorded directly to the track or with "stereo" mikes. Either way had I PERSONALLY been in that room the sounds would have "cancelled" before they got to my ears anyway and if they didn't I would not know whether they were from the left or right.

Since that is a SMALL portion of the sound information I can live with it being "lost" altogether in exchange for not pushing my speakers to the limit with long excursion @ low frequency. Remember no drivers suspension is perfect. Therefore, excessive low frequencies into the driver can "muddy" up the sound.

Also, relatively speaking (no pun intended) I can afford a much higher sensitivity in a woofer than I can the full range drivers. This leaves me with more room to play with a lower power "sub amp"

Example a 94 db@ 1W sub will allow me to use 1W for the equivalent output of my 88Db Speakers @ 4Watts or going backwards my 8 watt Fullrange setup gives me roughly 94DB SPL.

I can drive a single 94DB sub with 1 watt and have the same SPL.

Just "food for thought"
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Simple MM only RIAA preamp x-pro Analogue Source 60 1st November 2013 10:17 PM
tube preamp RIAA radiodieg Tubes / Valves 5 3rd September 2008 01:36 PM
Suggestions for RIAA Filter Caps? thermionic Solid State 8 27th March 2008 07:57 PM
MC Riaa preamp help/opinions please duderduderini Tubes / Valves 15 6th March 2007 02:42 PM
RIAA Preamp Justcallmedad Solid State 4 2nd September 2005 01:52 AM

New To Site? Need Help?

All times are GMT. The time now is 08:21 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2