• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Side project - d3a and 6c41c

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
athos56

athos56

Member
Joined 2006
I've been slowly getting parts for a d3a 6c41c set. I just got the 6c41c's in the mail from somewhere in the former soviet union. These are cool looking tubes! I'm on the list for the d3a experimenters board so I can fiddle around with how I'm going to drive the 6c41c. I thought I would start with Bas Horneman's schematic found here. Although I'm open to LEDs and other arrangments. There was also a 300b amp on Audiocircle that had an interesting d3a arrangement as well... Anybody else use this tube? From what I've read so far you run this tube with lower voltage, atleast compared to my Kt-88 or 2a3 amp.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom