Group buy pulse check for Pete Millett tube crossover PCB

leadbelly · 25th February 2009, 12:35 AM

I am trying to gauge interest in a group buy for PCBs for Pete Millett's tube crossover: http://www.pmillett.com/tube_active_crossover.htm

I am only interested in finding out if there is enough interest to warrant ordering enough to meet the 1st or 2nd price breakpoint for quantity. I am getting quotes now.

The boards are not so small and double sided, so they will not be as cheap as other group buys. Please do not reply if you are not serious.

leadbelly · 25th February 2009, 10:45 PM

Going...going...

It looks like even a small order of 10 will drop the price to about $30 shipped: I really expected more interest. If there are no takers I will just order for myself.

kevinkr · 26th February 2009, 03:53 AM

While I'm not currently interested I think it might take more than a day to determine whether or not there is general interest. Most people who run group buys around here have them open for several weeks at least. To keep the thread in view you will need to bump it every day or so..
I'd give it a week at least.

davej · 26th February 2009, 10:36 PM

Hey Leadbelly,

I don't know if this helps or not, but you can put me down for two boards...

Thanks,
Dave

leadbelly · 26th February 2009, 10:41 PM

Quote:

Originally posted by davej
I don't know if this helps or not, but you can put me down for two boards...

The more the merrier

audio_builder · 27th February 2009, 07:47 PM

Put my down for one.

Lee

leadfinger · 27th February 2009, 09:11 PM

Hello Leadbelly,

You can put me on your list for one board.

Thanks,

Leadfinger (Dave)

boywonder · 27th February 2009, 11:58 PM

One PCB supports a 2-way, 2 channel setup?

leadbelly · 28th February 2009, 12:34 AM

Quote:

Originally posted by boywonder
One PCB supports a 2-way, 2 channel setup?

Yes. It's 8.75" x 6.4".

TerribleT · 28th February 2009, 03:38 AM

Hi,
I'm in for one board. Thanks for the effort.
David

25th February 2009, 12:35 AM	#1
leadbelly diyAudio Member Join Date: Dec 2002 Location: Calgary, Alberta	Group buy pulse check for Pete Millett tube crossover PCB I am trying to gauge interest in a group buy for PCBs for Pete Millett's tube crossover: http://www.pmillett.com/tube_active_crossover.htm I am only interested in finding out if there is enough interest to warrant ordering enough to meet the 1st or 2nd price breakpoint for quantity. I am getting quotes now. The boards are not so small and double sided, so they will not be as cheap as other group buys. Please do not reply if you are not serious. __________________ Aerodynamics are for people who can't build engines. Enzo Ferrari

25th February 2009, 10:45 PM	#2
leadbelly diyAudio Member Join Date: Dec 2002 Location: Calgary, Alberta	Going...going... It looks like even a small order of 10 will drop the price to about $30 shipped: I really expected more interest. If there are no takers I will just order for myself. __________________ Aerodynamics are for people who can't build engines. Enzo Ferrari

26th February 2009, 03:53 AM	#3
kevinkr diyAudio Moderator Join Date: Sep 2004 Location: Boston, Massachusetts Blog Entries: 6	While I'm not currently interested I think it might take more than a day to determine whether or not there is general interest. Most people who run group buys around here have them open for several weeks at least. To keep the thread in view you will need to bump it every day or so.. I'd give it a week at least. __________________ www.kta-hifi.net

28th February 2009, 03:38 AM	#10
TerribleT diyAudio Member Join Date: Dec 2004 Location: Sacramento, CA	Xover Hi, I'm in for one board. Thanks for the effort. David

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

26th February 2009, 10:36 PM	#4
davej diyAudio Member Join Date: Nov 2005 Location: Howell Michigan	Hey Leadbelly, I don't know if this helps or not, but you can put me down for two boards... Thanks, Dave

27th February 2009, 07:47 PM	#6
audio_builder diyAudio Member Join Date: Feb 2009	Put my down for one. Lee

27th February 2009, 09:11 PM	#7
leadfinger diyAudio Member Join Date: May 2007 Location: Northeast Ohio	Hello Leadbelly, You can put me on your list for one board. Thanks, Leadfinger (Dave)

27th February 2009, 11:58 PM	#8
boywonder diyAudio Member Join Date: Jan 2008 Location: So.Cal.	One PCB supports a 2-way, 2 channel setup?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pete Millett Low-Mu Triode Preamp	wirewiggler	Tubes / Valves	13	8th November 2008 11:33 PM
Anyone Interested in Pete Millett Hybrid Amp PCB's?	Geek	Tubes / Valves	3	2nd November 2008 11:56 PM
Pete Millett's 829B amp -> monoblocks	lochness	Tubes / Valves	3	17th June 2008 12:30 AM
Pete Millett Universal Driver PCB's	Geek	Swap Meet	3	3rd September 2007 07:36 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read