Outer foil k40y-9

12dodeca · 18th February 2009, 12:48 AM

Does anyone know which side of a k40y-9 is the outer shield? I read that the backward E indicates this, but it's been awhile and I forgot.
Tried google but after an hour I give up. I don't own a scope so that method won't work for me. Richard

Ty_Bower · 4th May 2009, 04:59 PM

This is my understanding. I'm hoping someone will correct me if I am wrong.

surfstu · 4th May 2009, 10:09 PM

Is this really necessary? I have just built a linestage and the final output caps are audionote foil, I was on the website earlier and it appears that i have installed them the wrong way round! beginners luck!! my question is... will i really notice if i turn them around?

cheers stuart

Ty_Bower · 4th May 2009, 10:36 PM

Auricap says the outer foil should go to the signal source (driver stage) and the inner foil goes to the circuit output (power tube's grid). Many people who have tried say it doesn't make much difference either way.

http://www.audience-av.com/capacitor...plications.php

Wavebourn · 4th May 2009, 11:37 PM

If you ground the shield it does not matter, but if not it may pick up lower frequencies a bit better when outer shield is soldered to a grid.

18th February 2009, 12:48 AM	#1
12dodeca diyAudio Member Join Date: Feb 2007 Location: Reno	Outer foil k40y-9 Does anyone know which side of a k40y-9 is the outer shield? I read that the backward E indicates this, but it's been awhile and I forgot. Tried google but after an hour I give up. I don't own a scope so that method won't work for me. Richard

4th May 2009, 11:37 PM	#5
Wavebourn diyAudio Member Join Date: Sep 2006 Location: Pleasant Hill, CA	If you ground the shield it does not matter, but if not it may pick up lower frequencies a bit better when outer shield is soldered to a grid. __________________ The devil is not so terrible as his mathematical model! Wavebourn: We Create Creativity!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Empire 698 turntable Platter & Outer Ring, Belt, and Dustcover for sale	yo2tup	Swap Meet	2	11th May 2012 06:21 PM
FS: K40Y-9 PIO Caps	truenorth	Swap Meet	1	29th April 2009 03:57 AM
Input cap - outer foil end?	Nordic	Parts	14	24th March 2006 02:38 PM
WIMA FKP, any idea which end is outer foil ?	sceglar	Digital Source	12	16th October 2005 07:17 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

4th May 2009, 04:59 PM	#2
Ty_Bower diyAudio Member Join Date: Mar 2007 Location: Newark, DE	This is my understanding. I'm hoping someone will correct me if I am wrong.

4th May 2009, 10:09 PM	#3
surfstu diyAudio Member Join Date: Nov 2008	Is this really necessary? I have just built a linestage and the final output caps are audionote foil, I was on the website earlier and it appears that i have installed them the wrong way round! beginners luck!! my question is... will i really notice if i turn them around? cheers stuart

4th May 2009, 10:36 PM	#4
Ty_Bower diyAudio Member Join Date: Mar 2007 Location: Newark, DE	Auricap says the outer foil should go to the signal source (driver stage) and the inner foil goes to the circuit output (power tube's grid). Many people who have tried say it doesn't make much difference either way. http://www.audience-av.com/capacitor...plications.php

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)