• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

6550 drive question

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
K

kendt

Member
Joined 2006
I am going to build an amp based on the an kit2. Se6550. I noticed it is nearly identical to the kit1 (except for the srpp driver tube)

It got me wondering if a 6550 could be driven from the same driver stage used on a 300b/2a3 circuit. I have heard a really nice 300b amp using a 6en7 driver and thought it would be cool to try that driver with the 6550.

I am not real familiar with the 6550 so I'm not sure of the drive requirements.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom