|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
12th February 2009, 06:59 PM
|
#1 |
|
diyAudio Member
Join Date: Feb 2009
|
Using semiconductor curvetracer for tubes...
Howdy!
I've got this Tektronix 576 curvetracer just collecting dust so I figured I could extend it's usefulnes if I were able to use it for testing tubes as well... Will I be re-inventing the wheel again, ie is there any useful information out there? Has anyone done this already? Any help is useful.... What data would it be most useful gathering? What would a useful setup look like? Of course I also got external power supplies and dmm's... //Greg. |
|
|
12th February 2009, 07:07 PM
|
#2 |
|
diyAudio Member
Join Date: Jun 2002
Location: Torrance, Calif
|
Here's a thread on Prodigy Pro about the 575 curve tracer,
but mentions a book with conversion info. http://www.prodigy-pro.com/diy/index.php?topic=3033.0 Steve @ Apex Jr. |
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need amp repair help - Can you ID this semiconductor? | GaryM | Solid State | 13 | 21st February 2008 01:10 PM |
| National Semiconductor... | nelsondog | Swap Meet | 0 | 15th February 2007 03:11 AM |
| search for old ic, semiconductor | bluesman52 | Solid State | 1 | 20th January 2007 04:07 AM |
| motorola vs on semiconductor | Wagener | Solid State | 3 | 23rd May 2004 03:21 AM |
| New To Site? | Need Help? |
