|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Jan 2007
|
Hey all,
I finished building my aikido (6MG8) pre/headphone but need some help. Basically, it powers up fine, but almost no sound. I have removed volume and selector to try to simplify but no luck. Can someone help with known/expected values I can check on JB board? Any info I can provide please let me know. thanks in advance, pathmark |
|
|
|
|
#2 |
|
mostly thinkerer
diyAudio Member
|
Hi Pathmark
Some pictures would help the troubleshooting process! Diyaudio doesn't allow large images to be attached, so I suggest that you use some site (or Picasa) to post the pictures and then just put the link here. A first question: what is it what you are getting out of the preamp? Music, humm, buzz?
__________________
my surname is indeed 'de Best': neither misspelling nor snobbism! Ask SY!
|
|
|
![]() |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Hum diagnostic assistance? | weinstro | Solid State | 0 | 31st March 2009 10:13 PM |
| Use 9 pin Aikido PCB kit or buy 8 pin ? | Renron | Tubes / Valves | 6 | 25th November 2007 04:52 PM |
| New PSU for Aikido? | cbutterworth | Tubes / Valves | 5 | 6th September 2007 01:03 AM |
| Aikido PSU help | cbutterworth | Tubes / Valves | 48 | 13th October 2006 07:54 PM |
| Need a little diagnostic help | disgruntled | Subwoofers | 1 | 20th June 2006 04:22 AM |
| New To Site? | Need Help? |