|Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|27th December 2008, 10:07 AM||#1|
Join Date: Dec 2008
Quad II Advice
Apparently I have to post a few times before I can send a private email message.
So here goes.
I have replaced all capacitors and resistors inside of my Quads. Tubes are Svetlana 6L6GC's, Svetlana EF 86's, and GZ32's
I just pulled these back out of storage and would like to insure that everything is correct before I decide to use them again.
I am not interested in substantial modifications, just what may be required to make them work as well as possible.
I will attempt to run a pair of Magnepan MMG's which are inefficient and have a fairly flat impedance of 4 ohms.
They may not have the grunt, but I'll give it a try anyway.
Would any of you experienced Quad II guys like to chime in with a general "check this, replace that, keep an eye out for this post?"
Could this possibly turn into a thread that will cover all bases for Quad II owners?
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|quad advice required||johniss0001||Solid State||0||28th July 2008 10:14 PM|
|quad 909||dj_maxxro||Solid State||0||4th October 2005 04:11 AM|
|Quad bandpass subwoofer design need advice!||DJFUTILE||Multi-Way||6||29th March 2005 07:32 AM|
|Poster in Musical Instrument forum needs bridging advice on BrianGT 4780 advice||moving_electron||Chip Amps||0||16th February 2005 12:37 AM|
|Upgrade advice - general and specific (Quad 33/303)||trydecaf||Solid State||0||8th February 2005 11:04 PM|
|New To Site?||Need Help?|