did anyone build this nasty amp:
Cathode resistor on outputs looks far too low to me :hot:
I ran the output stage through Tube Cad PP Calculator.
Current per tube 95 mA
Plate Dissipation 27 W / 67% max
22V across the cathode resistor. 191 mA, 4.36 Watts, recommended bypass 332 uF.
Looks OK to me.
|All times are GMT. The time now is 07:27 AM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2013 DragonByte Technologies Ltd. (Resources saved on this page: MySQL 30.00%)
Copyright ©1999-2013 diyAudio