Modified Salas Mosfet Shunt Reg

mach1 · 17th December 2008, 11:35 PM

I just drew up this version of the Salas shunt reg using parts I have in my bin. Can anyone see any obvious errors?

Salas · 18th December 2008, 04:37 AM

Why not? Those 10M45S enhancement mode FETs with error amplifier which acts like depletion mode FET, plus the Dmos to set Vref, are all very well thought out choices. Since you have the parts give it a go. I would. I can't simulate it right now, plus I don't know if I have the models, so I can't tell you more on error possibilities. I just don't see striking errors on first read. You know those devices better than most of us. You will make it work. Certainly.
In the back of my mind I would be a bit afraid it may prove prone to easy oscillations with some cabling or loads, or layout and probing, due to the wide BW Cascodes. Also I would be curious until first listen to know what those 1K RdsON Dmos achieve. Naah...It will do fine.

mach1 · 18th December 2008, 05:36 AM

Thanks - I'll heat up the iron tonight !

18th December 2008, 05:36 AM	#3
mach1 diyAudio Member Join Date: Sep 2004 Location: Brisvegas	Thanks - I'll heat up the iron tonight ! __________________ Au rutti wop-bop-a-loom-bop-a-boom-bam-boom - Richard Penniman

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

18th December 2008, 04:37 AM	#2
Salas diyAudio Chief Moderator Join Date: Oct 2002 Location: Athens-Greece	Why not? Those 10M45S enhancement mode FETs with error amplifier which acts like depletion mode FET, plus the Dmos to set Vref, are all very well thought out choices. Since you have the parts give it a go. I would. I can't simulate it right now, plus I don't know if I have the models, so I can't tell you more on error possibilities. I just don't see striking errors on first read. You know those devices better than most of us. You will make it work. Certainly. In the back of my mind I would be a bit afraid it may prove prone to easy oscillations with some cabling or loads, or layout and probing, due to the wide BW Cascodes. Also I would be curious until first listen to know what those 1K RdsON Dmos achieve. Naah...It will do fine.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)