Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Grid - Screen Alignment (X-Rays)
Grid - Screen Alignment (X-Rays)
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 30th September 2008, 12:58 AM   #1
kenpeter is offline kenpeter  United States
diyAudio Member
 
Join Date: Nov 2007
Location: Dallas
Default Grid - Screen Alignment (X-Rays)

I recently promised someone I'd xray the Chinese 6L6CGR I had.
Don't remember now which thread? Might as well start another...
There are no holes "for screen alignment" in plate of this tube.
Don't know if that is really what typical beam power plate holes
are for, or something else?
Attached Images
File Type: jpg ken1.jpg (14.9 KB, 1290 views)
  Reply With Quote
Old 30th September 2008, 01:00 AM   #2
kenpeter is offline kenpeter  United States
diyAudio Member
 
Join Date: Nov 2007
Location: Dallas
Pic 2
Attached Images
File Type: jpg ken2.jpg (16.8 KB, 1199 views)
  Reply With Quote
Old 30th September 2008, 01:02 AM   #3
kenpeter is offline kenpeter  United States
diyAudio Member
 
Join Date: Nov 2007
Location: Dallas
Pic 3

This tube is just slightly too big to fit all in one Xray image.
But I have one coming that tries to cover most of it.
Attached Images
File Type: jpg ken3.jpg (15.6 KB, 1171 views)
  Reply With Quote
Old 30th September 2008, 01:05 AM   #4
kenpeter is offline kenpeter  United States
diyAudio Member
 
Join Date: Nov 2007
Location: Dallas
Mind you, both getters were in the bottom. These wings are for G1.
Attached Images
File Type: jpg ken4.jpg (13.8 KB, 1108 views)
  Reply With Quote
Old 30th September 2008, 01:07 AM   #5
kenpeter is offline kenpeter  United States
diyAudio Member
 
Join Date: Nov 2007
Location: Dallas
Extreme closeup of alignment (or mis-alignment?) near the center.
I have no reason to think there is anything especially wrong here.
Attached Images
File Type: jpg ken5.jpg (15.8 KB, 1162 views)
  Reply With Quote
Old 30th September 2008, 01:43 AM   #6
DigitalJunkie is offline DigitalJunkie  United States
diyAudio Member
 
Join Date: Apr 2003
Location: Portland,Oregon
Send a message via AIM to DigitalJunkie
Wow,Cool pics!
  Reply With Quote
Old 30th September 2008, 02:28 AM   #7
Sch3mat1c is offline Sch3mat1c  United States
diyAudio Member
 
Sch3mat1c's Avatar
 
Join Date: Jan 2003
Location: Milwaukee, WI
Send a message via ICQ to Sch3mat1c Send a message via AIM to Sch3mat1c
On the right side of the third image, it looks like parallax effect reaches a minimum and the grid-screen offset is about 20% of the winding pitch. Could probably be better...

Thanks for the x-rays!

Tim
__________________
Seven Transistor Labs, LLC
Projects and Resources / Electronic Design and Consultation
  Reply With Quote
Old 30th September 2008, 03:01 AM   #8
Sch3mat1c is offline Sch3mat1c  United States
diyAudio Member
 
Sch3mat1c's Avatar
 
Join Date: Jan 2003
Location: Milwaukee, WI
Send a message via ICQ to Sch3mat1c Send a message via AIM to Sch3mat1c
Bah, I was just about to edit then it said it timed out...


Edit: here's the image, brightened up a bit (for analyzing relative density, refer to the original) and with a scale marker (based on the bulb being about 1.5" across). Evidently the grid pitch is about 14 TPI, so the misalignment is around 0.014".

Tim
__________________
Seven Transistor Labs, LLC
Projects and Resources / Electronic Design and Consultation
  Reply With Quote
Old 30th September 2008, 05:07 AM   #9
Sch3mat1c is offline Sch3mat1c  United States
diyAudio Member
 
Sch3mat1c's Avatar
 
Join Date: Jan 2003
Location: Milwaukee, WI
Send a message via ICQ to Sch3mat1c Send a message via AIM to Sch3mat1c
*cough*

Click the image to open in full size.
__________________
Seven Transistor Labs, LLC
Projects and Resources / Electronic Design and Consultation
  Reply With Quote
Old 30th September 2008, 08:42 AM   #10
kenpeter is offline kenpeter  United States
diyAudio Member
 
Join Date: Nov 2007
Location: Dallas
The total diameter across the entire glass envelope,
which also happens to be the same diameter as the
octal base, is only 1.3 inches. Rather small for a 6L6.

Dunno what breed of monster you thought this was?
I think you might have diameter mixed up with radius.
There is simply no way this tube is 3 inches across...

Its probably too late to edit your post now, but you
seem to be hosting the picture elsewhere. I would
assume you still have access to edit the scale?

How does this affect your calculation regarding the
pitch of the grids?
  Reply With Quote

Reply


Grid - Screen Alignment (X-Rays)Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Screen grid resistors stoo Tubes / Valves 66 20th October 2015 07:35 PM
Screen grid driver for PL519? Fuling Tubes / Valves 6 24th November 2010 02:36 AM
Screen grid zeners; which? Klimon Tubes / Valves 37 10th March 2008 01:52 AM
6V6 SE and Screen Grid Voltage zxx123 Tubes / Valves 5 2nd February 2005 05:36 PM
screen grid decoupling cap question.... Morse Tubes / Valves 10 21st April 2003 12:29 AM


New To Site? Need Help?

All times are GMT. The time now is 09:30 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki