• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Ccs

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
R

ray bronk

Member
Joined 2005
Hi all,

I think this has been covered somewhere else, but I thought I would ask more specifically.

I am now gathering the parts for Bvuce's GGP. Now, what I want to do is to get the parts for the CCS on the filament supply and eliminate the B- supply. So could someone on this forum send me a schematic with the proper parts and where to get them for this CCS. I was told that it would probably cost me all of 10 bucks to do this. I will be starting out with a 15V supply for the filament and regulate it down to the 12.6 tube filaments., and go from there. Thanks in advance for any help here.

Ray Bronk
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom