Measuring current distortion - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 25th September 2008, 10:37 AM   #1
diyAudio Member
 
Join Date: Jun 2004
Location: Indiana
Default Measuring current distortion

The recent resurrection of the current drive thread on the loudspeaker forum got me to thinking about measuring distortion current rather than voltage.

I don't have the equipment but it would be interesting if one of you who did could measure the distortion current of an amplifier driving a single full range driver. What I have in mind is say a single ended topology with triode output v.s. pentode output with no feedback driving a full range speaker. Place a low value (1 ohm or less) non-inductive power resistor in series and put your scope or distortion analyzer across that resistor. This way we can measure the harmonic distortion series in terms of current. One could also measure frequency response in terms of current as well.

Not sure what we would find but it might be interesting and enlightening. This is based on the theory that driver output is more closely related to voice coil current than voltage.

After getting basic numbers we could then check the effects of local and global NFB and even various enclosure options. It might also be instructive to measure a lowish Qm speaker like the Pioneer 4" fullrange (Qm=1.4) v.s. one with a more normal Qm of 4 to 6. I have often wondered if the highish Zout of a naked pentode might be advantageous for fullrange drivers or even bass drivers with more mechanical damping capability.

Whacha think?
__________________
If We The People refuse to hear the truth we will be ruled by liars.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Measuring distortion Buzzy Multi-Way 5 5th November 2008 05:44 PM
Measuring speaker distortion ak_47_boy Equipment & Tools 0 12th September 2008 02:22 AM
Measuring driver distortion otto88 Multi-Way 9 18th June 2008 01:59 PM
RADFORD - Low Distortion Measuring Set TomWaits Equipment & Tools 15 22nd November 2007 04:17 PM
measuring distortion/ZenV7 PassFan Pass Labs 2 18th August 2004 12:51 AM


New To Site? Need Help?

All times are GMT. The time now is 02:01 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2