diyAudio (
-   Tubes / Valves (
-   -   6N23P, 6S19P anybody knows? (

lineup 9th September 2008 04:30 PM

6N23P, 6S19P anybody knows?
2 Attachment(s)

anybody knows these tubes? 6N23P, 6S19P
are there any equivalent replacement tubes?

is about one OTL Headphone amplifier circuit using 230 Volt supply
V1 = 6N23P .... V2,V3 = 6S19P

see attachment

planet10 9th September 2008 05:22 PM

6H23pi is considered a 6922.


lineup 9th September 2008 07:08 PM

yeah, thanks,
I did figure this out 6922, E88CC, 6DJ8

the others = output stage tubes I have never heard of

by the way, i found that schematic at one russian site

azazello 9th September 2008 07:33 PM

6S19P = apr. ED8000 /

Colt45 9th September 2008 08:33 PM

6S19P is something like one section of a 6080/6AS7/6N13P. 9th September 2008 08:38 PM

The 6S19P is similar to the American 7233, which is not cheap or common even here in America. The pinout is different. The 6S19P is common on Ebay. I got a box full from the Ukraine for $3 each. It is probably close enough to 1 section of a 6AS7 that a 6AS7 could be made to work.

lineup 9th September 2008 10:30 PM

thanks for all information
i think now, i will be able to find a similar tube
if i go for this headphone OTL ( Output Transformer Less ) amplifier

there will be a way.
if not find ABSOLUTE equal tubes for output,
will probably be possible to alter resistors in output

Is it two Tubes SRPP output?
.. unless I am mistaken


lineup 10th September 2008 11:19 PM

if looking at my schematic, in first post

Wouldn't it be possible to use 6H30pi in the output PUSH-PULL?

azazello 11th September 2008 09:41 AM

Of course, but You must make fase-invertor befor PP 6N30P /or selfinvertor - I have this one/.

All times are GMT. The time now is 03:39 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2