Power transformer question - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 6th August 2008, 06:39 AM   #1
diyAudio Member
 
Join Date: Feb 2007
Location: victoria canada
Default Power transformer question

I need a power transformer with a 360-0-360 Hv @ 260 ma and 5v@2amps and 6.3v c.t. @8 amps. I can't seem to find one with 8 amps @ 6.3 volts. Each el34 needs 1.5amps X 4 = 6 plus 3- 12ax7 @ .3 amps =.9 plus ef86@.2 X4=.8 total = 7.7 amps. I've tried hammond. Any ideas. I was going to rewind the old one but that would cost $700 or more!
  Reply With Quote
Old 6th August 2008, 07:40 AM   #2
Tweeker is offline Tweeker  United States
diyAudio Member
 
Join Date: Dec 2004
Location: Cincinnati, Ohio
Do you have room for a separate filament transformer?
__________________
Be sure your foil hat has a good low impedance ground.
  Reply With Quote
Old 6th August 2008, 07:49 AM   #3
diyAudio Member
 
Join Date: Feb 2007
Location: victoria canada
Not really. Its a leak amp from 1961. I was going to get the origional rewound but it would cost $700 to 1500. Then I was going to put a hammond transformer in but couldn't find one. The total current draw is 260ma so I would need a transformer with 260ma @ 720(360-ct-360) right? This is only a 50watt stereo amp(25w/ch).
  Reply With Quote
Old 6th August 2008, 08:29 AM   #4
chrish is offline chrish  Australia
diyAudio Member
 
chrish's Avatar
 
Join Date: Oct 2003
Location: Sydney
Email Edcor. They will build one to your spec for an extra $20 design fee. There prices were better than Hammond even with the design fee factored in. http://www.edcorusa.com/home.html
  Reply With Quote
Old 6th August 2008, 08:37 AM   #5
diyAudio Member
 
Join Date: Feb 2007
Location: victoria canada
Thanks I sent them a email.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Power Transformer for 6V6 SE Amp Question zxx123 Tubes / Valves 3 25th January 2008 03:06 PM
Power transformer voltage question hbarki Parts 3 24th October 2005 08:53 AM
transformer power question needtubes Parts 2 9th April 2004 12:13 PM
i am new, power transformer question i_drives Parts 1 25th November 2003 01:53 AM
power transformer question Bill Fitzpatrick Solid State 5 8th June 2001 05:22 AM


New To Site? Need Help?

All times are GMT. The time now is 06:35 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2