diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   Please check my PS pcb board layout for problems???? (http://www.diyaudio.com/forums/tubes-valves/126135-please-check-my-ps-pcb-board-layout-problems.html)

marchewd 10th July 2008 05:50 AM

Please check my PS pcb board layout for problems????
 
Hey guys,
I am trying my hand at a scratch built Transcendent Sound GG tube pre-amp. I have built a few kits and I am trying to improve my knowledge of audio schematics, circuits, etc. Can anyone just double check to make sure that my PS pcb board is correct?

Thanks,
Dan

(copyrighted image removed by moderators)

http://i263.photobucket.com/albums/i...PSPCBBoard.jpg

Brett 10th July 2008 11:15 AM

Do it P-P.

Svein_B 10th July 2008 02:10 PM

2 Attachment(s)
Well, I would do p-to-p also.

However if you want to check the PCB, it is a little easier if you print it with the foil pattern together with component lay-out.

SveinB

marchewd 10th July 2008 05:28 PM

Thanks Svein! Does everything seem to go together correctly?

lochness 10th July 2008 05:31 PM

Does the program you used have the ability to test the circuit?

SY 10th July 2008 05:34 PM

Dan, I had to remove the schematic since it is the copyrighted property of Transcendent Sound, with a copyright notice right on the schematic. If you want to sketch up your own and post it, that will accomplish what you want while not violating the law.

marchewd 10th July 2008 05:47 PM

Here is the schematic....sorry about posting the copyrighted schematic. The circuit says it works, but I just wanted to make sure that the layout looks okay as well.

http://i263.photobucket.com/albums/i...82/PSboard.jpg


All times are GMT. The time now is 06:07 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2