Tango XE-20S Specification

mono_plate · 26th June 2008, 02:27 PM

Hello,
This is my first post. I have question about maximum voltage (B+)for Tango XE-20S. I'm interested in 813 single ended. But, I'm not sure, I can used XE-20S for 813SE OPT. I need to run 700-900V for B+.

PS. I'm sorry about my english language is poor.

Alain Dupont · 27th June 2008, 07:37 AM

mono_plate,

About your Tango XE-20S their spec go to 1000volts max at 80mA

So at 800/900 Volts you are safe.

Good diy.

Alain.

danielrs · 10th April 2009, 11:12 AM

Agree with Alain. Sure you can use XE-20S.

If I were you, I wish to go with Pete Millett's design (less microprocessor) but can not afford XE-20S budget, so think to use a pair of James 6135HS 5k/30w which is cheaper ($300 for a pair plus shipping from Taiwan).

http://www.pmillett.com/813_se_triode_amps.htm

26th June 2008, 02:27 PM	#1
mono_plate diyAudio Member Join Date: Aug 2006	Tango XE-20S Specification Hello, This is my first post. I have question about maximum voltage (B+)for Tango XE-20S. I'm interested in 813 single ended. But, I'm not sure, I can used XE-20S for 813SE OPT. I need to run 700-900V for B+. PS. I'm sorry about my english language is poor.

27th June 2008, 07:37 AM	#2
Alain Dupont diyAudio Member Join Date: Sep 2003 Location: Paris - France	mono_plate, About your Tango XE-20S their spec go to 1000volts max at 80mA So at 800/900 Volts you are safe. Good diy. Alain. __________________ Did live about 10 years in Canada Back to France since the 1st February 2007.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need (2) .375 Cu Ft Cabinets to this specification..	kizm0	Swap Meet	1	12th July 2009 06:49 AM
Specification	ashlar	Car Audio	6	1st December 2008 05:01 PM
What does this specification mean?	infoseeker	Car Audio	8	4th May 2008 04:38 PM
ballast specification	vratko2000	Parts	0	13th March 2005 07:37 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

10th April 2009, 11:12 AM	#3
danielrs diyAudio Member Join Date: Dec 2004 Location: Damar	Agree with Alain. Sure you can use XE-20S. If I were you, I wish to go with Pete Millett's design (less microprocessor) but can not afford XE-20S budget, so think to use a pair of James 6135HS 5k/30w which is cheaper ($300 for a pair plus shipping from Taiwan). http://www.pmillett.com/813_se_triode_amps.htm

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)