Larry Moore 10Y Squared

korneluk · 25th June 2008, 02:10 AM

Folks,

Does anyone know what make/model of interstage transformer is used in the Larry Moore 10Y squared amp?

TIA,

-- josé k.

HollowState · 25th June 2008, 02:19 AM

From the picture it looks like a Tango. Don't know the number.

bambadoo · 25th June 2008, 06:14 AM

Dear all. This amp looks interesting. Are there any information on it? Schematics etc?

Best Regards

korneluk · 25th June 2008, 10:47 AM

Quote:

Originally posted by bambadoo
Dear all. This amp looks interesting. Are there any information on it? Schematics etc?

Red the thread here:

http://db.audioasylum.com/cgi/m.mpl?...ed&r=&session=

andyjevans · 25th June 2008, 12:43 PM

I use a 10Y > 10Y > 300b amp. I use Lundahl interstages. LL1660 and then LL1671 should be fine, or a couple of LL1660.

It's a great combination of tubes!

Andy Evans

EZ_Angus · 25th June 2008, 05:40 PM

lol, i don't think Larry used nearly enough screws around the perimeter of that amp!!

25th June 2008, 02:19 AM	#2
HollowState diyAudio Member Join Date: Aug 2006 Location: Taxland, New Jersey	From the picture it looks like a Tango. Don't know the number. __________________ "The supercomputer is technologically impossible. It would take all of the water that flows over Niagara Falls to cool the heat generated by the number of vacuum tubes required." ~ Professor of Electrical Engineering, New York University

25th June 2008, 05:40 PM	#6
EZ_Angus diyAudio Member Join Date: Oct 2003 Location: norman ok	lol, i don't think Larry used nearly enough screws around the perimeter of that amp!! __________________ "Give me the Luxuries of life & I will gladly live without the Necessities" (Frank Lloyd Wright)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Larry Moore power supply	korneluk	Tubes / Valves	0	24th December 2008 04:23 PM
Larry Moore 300B/10Y/6SN7GT	MartinV56	Tubes / Valves	22	24th June 2008 01:50 PM
OT: Ping Larry L.	hooha	Subwoofers	0	7th April 2007 12:11 AM
E = m x c^2 .... Energy = mass x lightspeed squared	gromanswe	Tubes / Valves	35	31st July 2002 10:28 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

25th June 2008, 06:14 AM	#3
bambadoo diyAudio Member Join Date: Feb 2003 Location: West Coast of Norway	Dear all. This amp looks interesting. Are there any information on it? Schematics etc? Best Regards

25th June 2008, 12:43 PM	#5
andyjevans diyAudio Member Join Date: Sep 2003 Location: London	I use a 10Y > 10Y > 300b amp. I use Lundahl interstages. LL1660 and then LL1671 should be fine, or a couple of LL1660. It's a great combination of tubes! Andy Evans

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)