diyAudio (
-   Tubes / Valves (
-   -   Edcor XSM10K/15K like intestage in tube SE ? (

Angelm 28th May 2008 08:08 AM

Edcor XSM10K/15K like intestage in tube SE ?
Hello, does anyone have experience with this transformer,
is it suitable for interstage in SE tube amplifier, 6SN7 to 300B ?

Maximum Input: 2.5 watts (RMS)
Input: 10,000 ohms
Output: 15,000 ohms
Frequency Response: 20~20,000 Hz, +/- 1 dB
Insertion Loss: 0.5 dB


mwiebe 28th May 2008 11:32 PM

I've used the XSM10K/10K as an interstage quite a few times, but not the 10K/15K. If you pull less then 2ma DC through the primary of the 10K/10K you can get away with series use, otherwise you need to parallel feed the interstage. If you use the 6SN7 I expect you will have to parallel feed it. You can use a CCS, resistor or a plate choke on the 6SN7 plate. Sounds much better then the cost suggests.

All times are GMT. The time now is 07:48 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2