|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
||
 |
|
|
Thread Tools | Search this Thread |
23rd February 2008, 07:52 AM
|
#1 |
|
diyAudio Member
Join Date: Jun 2005
Location: Athens
|
Mesa Boogie Maverick schematic any1?
I'm having this problem which vrey simple at first but I'm getting confused as time goes by...
Whenever I switch from rhythm to lead channel either using the footswitch or the on chassis mounted switch I get sound that is either very low and "distorted" or no sound... Sometimes it works fine for some time and then it drops suddenly! I changed all tubes, the switch, checked ground connections... The problem persists... I thought it was a problem from the power supply, when i switch to another channel due to the fact that the voltage must change in every tube of the circuit thus the power supply(capacitors) would be burned but no cap seems burned... Has anyone encountered a problem like that in the past with a Maverick? A similar problem on a different amp? |
|
|
23rd February 2008, 06:11 PM
|
#2 |
|
diyAudio Member
Join Date: Aug 2006
Location: Taxland, New Jersey
|
__________________
"The supercomputer is technologically impossible. It would take all of the water that flows over Niagara Falls to cool the heat generated by the number of vacuum tubes required." ~ Professor of Electrical Engineering, New York University |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Mesa boogie | odem81 | Tubes / Valves | 15 | 18th April 2010 12:00 AM |
| Mesa Boogie DIY! | Gabster | Instruments and Amps | 21 | 17th April 2010 08:18 PM |
| Mesa/Boogie Bass 400 psu | Greg3333 | Instruments and Amps | 10 | 21st February 2010 08:08 PM |
| Mesa Boogie schematic needed | Original Burnedfingers | Instruments and Amps | 11 | 27th May 2008 10:37 PM |
| Mesa Boogie Dual Caliber DC-3 schematic? | Netlist | Tubes / Valves | 0 | 28th February 2004 09:45 AM |
| New To Site? | Need Help? |
| Page generated in 0.07674 seconds (71.26% PHP - 28.74% MySQL) with 10 queries |
