|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
||
 |
|
|
Thread Tools | Search this Thread |
4th February 2008, 09:17 PM
|
#1 |
|
diyAudio Member
Join Date: May 2005
Location: Dallas (but I am not a Texan!)
|
One-Electron PRC chokes as PS input choke?
Just curious... has anybody tried using the One-Electron PRC-1 or PRC-2 "plate retard coils" as choke-input power supply chokes?
Seems like they would work well - they're designed for lots of AC voltage - and they're reasonably priced... http://www.one-electron.com/trans.html John, you out there? Pete |
|
|
4th February 2008, 10:47 PM
|
#2 |
|
diyAudio Member
Join Date: Jan 2005
Location: Chicago
|
Pete,
I don' know the answer to your question, but Jack at Electra-Print wound a choke for a choke input PS (~30H for a 60mA DC PS) for me for a bit less than those cost. I don't have the receipt in front of me, but I think it was about 2/3 the cost. I have been abusing it at 75mA (w/ a small 1uF input cap to raise voltage a tad) without issue, noise, or ripple.
__________________
http://www.ecpaudio.com |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Input chokes | sonicman | Solid State | 10 | 17th February 2009 05:39 PM |
| Report: One-Electron PRC as input choke | pmillett | Tubes / Valves | 2 | 11th February 2008 04:50 AM |
| Choke rating for choke input duty | cbutterworth | Tubes / Valves | 14 | 9th November 2007 04:43 PM |
| Chokes Designed for Choke Input PSU's | sorenj07 | Tubes / Valves | 7 | 25th October 2007 09:54 AM |
| Resistor-Input vs. Choke-Input vs. Cap.Multip. | Blitz | Pass Labs | 13 | 26th September 2003 04:59 AM |
| New To Site? | Need Help? |
| Page generated in 0.06007 seconds (68.78% PHP - 31.22% MySQL) with 10 queries |
