• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

function generator

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
D

d1camero

Member
Joined 2006
I have and old HP and a B&K function generator. Both have too much harmonic distortion. Neither of them have a sweep function (other than me turning the knob!)

Any recommendations for a nice audio generator with sweep? Something that puts out a really good sine wave?

thanks
d1
 
S

Svein_B

Member
Joined 2005
As mentioned in the linked thread, a PC based signal generator produce very good (low distortion) signals in the audio band (20-20K)

I use ARTA fo ra lot of amplifier and speaker measurements.
Some good stand-alone signal generator and other utilities can be found at Svante's page: http://www.speech.kth.se/smptool/

I also find that my old HP signal generator has surprisingly high distrortion with a lot of higher harmonics in the audio band, but is handy when I need higher frequencies and 10KHz square waves etc.

SveinB.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom