1st DIY project in a loooooong time

DaLarry · 17th January 2008, 04:38 PM

I haven't done a DIY project since the 1960's when I built a ST-70, PAS3 and FM3. For my reintroduction to DIY I've decided to start with a driver board from Triode Electronics for my stock MK IV's. I purchased one of TE's boards with parts. The project seems simple enough and I've been studying all my resistor charts but I would feel better if I had a photo or two. Has anybody done this particular upgrade? Do you have a decent hi rez photos of the finished board? If so, could you post or email them to me?

Thanx.

Ty_Bower · 17th January 2008, 08:52 PM

Have you tried asking Matt at Triode if he has any photos? He is usually a pretty helpful guy...

DaLarry · 17th January 2008, 09:43 PM

Actually I did. I haven't heard back yet.

Cobra2 · 18th January 2008, 05:41 PM

A link to the boards?

Arne K

Ty_Bower · 18th January 2008, 06:07 PM

I believe he is talking about these:
http://store.triodestore.com/mk4boards.html

DaLarry · 18th January 2008, 06:10 PM

A link to the boards? I'm not sure I understand. In any event, I overcame my trepidation, thanks in part to rediscovering how to use my VOM, and stuffed the board. One piece arrived broken. When I get that replaced, on to the testing.

Cheers to all.

DaLarry · 18th January 2008, 06:14 PM

Quote:

Originally posted by Ty_Bower
I believe he is talking about these:
http://store.triodestore.com/mk4boards.html

I've looked at those. The blank board is depicted but not the stuffed one. In any event, I dug up my nerve, stuffed the board, and I guess we will see if I did it right.

17th January 2008, 04:38 PM	#1
DaLarry diyAudio Member Join Date: Oct 2007	1st DIY project in a loooooong time I haven't done a DIY project since the 1960's when I built a ST-70, PAS3 and FM3. For my reintroduction to DIY I've decided to start with a driver board from Triode Electronics for my stock MK IV's. I purchased one of TE's boards with parts. The project seems simple enough and I've been studying all my resistor charts but I would feel better if I had a photo or two. Has anybody done this particular upgrade? Do you have a decent hi rez photos of the finished board? If so, could you post or email them to me? Thanx.

18th January 2008, 05:41 PM	#4
Cobra2 DIY ! diyAudio Member Join Date: Apr 2002 Location: Stavanger, Norway	A link to the boards? Arne K __________________ Ars longa, vita brevis

18th January 2008, 06:10 PM	#6
DaLarry diyAudio Member Join Date: Oct 2007	I did it anyway A link to the boards? I'm not sure I understand. In any event, I overcame my trepidation, thanks in part to rediscovering how to use my VOM, and stuffed the board. One piece arrived broken. When I get that replaced, on to the testing. Cheers to all.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First Time Speaker Project	mattthegamer463	Multi-Way	40	9th December 2008 04:27 PM
Time coherency (MTM Project)	Twisted85	Multi-Way	42	7th September 2008 10:51 PM
1st Time project - Report 1	Rob11966	Tubes / Valves	14	30th October 2007 07:14 AM
1st Project - Half time report	Rob11966	Tubes / Valves	6	26th August 2007 06:24 AM

17th January 2008, 08:52 PM	#2
Ty_Bower diyAudio Member Join Date: Mar 2007 Location: Newark, DE	Have you tried asking Matt at Triode if he has any photos? He is usually a pretty helpful guy...

17th January 2008, 09:43 PM	#3
DaLarry diyAudio Member Join Date: Oct 2007	Actually I did. I haven't heard back yet.

18th January 2008, 06:07 PM	#5
Ty_Bower diyAudio Member Join Date: Mar 2007 Location: Newark, DE	I believe he is talking about these: http://store.triodestore.com/mk4boards.html

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read