Another AG9016 "addict" - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 17th January 2008, 01:59 PM   #1
Cees66 is offline Cees66  Netherlands
diyAudio Member
 
Join Date: Jan 2008
Default Another AG9016 "addict"

Hi,

first of all my copliments on this forum, especially the links on tube related articles, often on entry-level, are very very helpfull.

As a brief introduction, I just finished (re)building my first EL84 SE amplifier (Kontakt KT7). Although I bought the amp in "working" order it needed some new capacitors and a by-pass of the input section in order to get a reasonable sound.

After a while I decided to fully strip the amp, and rebuild it from scratch with new (and preferably better) parts, and although I had minor knowledge on tube electronics, I managed to get it up and running again.

I am actually working on a site were the rebuilding process will be described in full with detailed pics, and as soon as it is finished I will drop a link as I feel that this could be interesting for other applicant Kontakt/Bocama/Lafayette rebuilders.

Now only recently I bought a philips AG9016 amp which is the next project I want to dig in to. I have read the topics on this forum on this amp, i.e. 40 yrs old philips AG9016 flea-power ?,
and there seems to be somesort of "improved" schematic were most of the C's and R's are removed?

There was actually an article in a magazine called A&T (!?!) how to "pimp" this specific amp, but somehow I cannot find it anywhere on the net.

To make a long story short, all (schematic) information, additional tweaks etc., are more then welcome !

Thanks in advance

Cees66
  Reply With Quote
Old 17th January 2008, 03:47 PM   #2
Svein_B is offline Svein_B  Norway
diyAudio Member
 
Join Date: Oct 2005
There are a couple of threads on this sweet little amp:
40 yrs old philips ag9016 se flea-power ?
The diagram for the complete rebuild as published in AUDIO&TECHNIEK does not look very sound to me. EL95 pentode with no feedback

A more recent tread:
Need Help. Anyone with Philips AG 9016??
where I described a couple of smaller mods, without destroying the original design.

SveinB.
  Reply With Quote
Old 17th January 2008, 06:19 PM   #3
Cees66 is offline Cees66  Netherlands
diyAudio Member
 
Join Date: Jan 2008
Hi Svein,

thanks for your feedback, the tweaks that you had suggested
in previous threads are already on my "to do" list.

I was just curious how the schematic with mimimal C's and R's
would look, and if it was worth giving it a try, so if it is still available somewhere I would certainly like to have a look at it.

How do you feel about skipping the tonal part, by bypassing
the bass and treble pots, it seems like a passive circuit, so
bypassing it would give the same tonal characteristics as with
both controls set to full I believe..

Regards
Cees66
  Reply With Quote
Old 2nd April 2008, 08:38 PM   #4
diyAudio Member
 
Join Date: Jan 2005
Location: South of the Netherlands
Hello, look at my site to see the part about skipping the tonal part.
www.audiokit.nl and go to modifications. The amp sounds very clear, also when done on the original printboard. If you want I can send pictures of the mod. on the printboard.

regards,
Benny
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
"TECHNO"Amp building in progress-using "Iron Method" zox2003 Solid State 23 30th March 2010 08:42 PM
What makes an amplifier "bright", "warm", or "neutral"? JohnS Solid State 51 13th December 2009 06:42 PM
Charcoal "Supreem" hi-density foam "enclosure" IG81 Multi-Way 0 23rd April 2009 01:34 PM
Some final pics of "Stacks" revisited and "Askew" with stand Andy G Multi-Way 2 3rd February 2005 06:07 AM
Anyone used Scan-Speak's "Flow Resistors" or "Aperiodic Vents"? Ignite Multi-Way 3 18th November 2001 08:42 AM


New To Site? Need Help?

All times are GMT. The time now is 09:43 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2