|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
|
||
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Jul 2007
|
My dads tube tester(kickok 752A) recently went out on him. Everything checks out fine, but it doesn't work. HIm and another guy have reason to beleive it's the transforemer, would anyone happen to know where to get one? I was given the names Dave Nelson and Kara Chaffee, i was told they might be able to help. Any help would be greatly appreciated.
Thanks! |
|
|
|
|
#2 |
|
diyAudio Member
|
Hi farriswheel,
You haven't given much information. The specs for the transformer would be helpful, as a minimum. A link to the schematic, etc, would be a good idea. I've repaired a few tube testers. The problems I encountered were usually bad capacitors. It would help a lot to know what they tested, how they tested, and what the measurement results were. There might be a schematic for that unit at http://www.nostalgiaair.org , and maybe also calibration/alignment info. Another good discussion group in which to search and ask might be the rec.antiques.radio+phono group, at http://groups.google.com , if the old hands are still around. You might also want to search then ask in the sci.electronics.repair group , there, and maybe the rec.radio.amateur.boatanchors (sp?) group. Good luck. |
|
|
|
|
#3 |
|
Audio Junkie
diyAudio Member
|
This is an old post now. but Roger Kennedy at www.alltubetesters.com repairs Hickok and has replacement transformers!
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Hickok Upgrades | Zero Cool | Tubes / Valves | 0 | 23rd June 2008 12:36 AM |
| Hickok 800 settings | darryljoe | Tubes / Valves | 2 | 21st June 2007 05:42 PM |
| Help with Hickok 539A tube tester repair.. | Mort Caldwell | Tubes / Valves | 7 | 16th January 2005 03:27 AM |
| What is a Hickok 533 worth? | G | Tubes / Valves | 3 | 9th December 2003 06:30 AM |
| Hickok 600/605/800 settings? | lgo51 | Tubes / Valves | 1 | 3rd May 2002 04:18 AM |
| New To Site? | Need Help? |
| Page generated in 0.07973 seconds (71.25% PHP - 28.75% MySQL) with 10 queries |