Output Noise question
I was wondering whether someone could give me some guidance - I am testing the first of my C3G/PX25 DRD monoblocks and currently have around 2.5-3.0 mV of hum on the output.
This level I can hear through my speakers from my sitting position.
There are a number of bits and pieces that I still need to implement in this monoblock, like screening the input wire and sorting out the star ground for the CLCLC supply.
The question that I have is what is a suitable noise level to aim for? 1.0mV? My speakers are around 97db/M.
Thanks in advance, Ian
Take a signal with 100 Hz to your loudspeaker terminals and decrease the signal to the level of your choice...
I never even thought of that :ashamed:
Should be quite easy to test.
|All times are GMT. The time now is 05:30 PM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright ©1999-2016 diyAudio