Old Valco Amp Tube Problem - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 4th February 2003, 02:07 AM   #1
diyAudio Member
 
Join Date: Feb 2003
Location: Baton Rouge, LA
Default Old Valco Amp Tube Problem

bought an old Valco-made Class A tube amp over the internet. It has 4 12ax7's, 1 6y6, and 1 5y3. The 5y3's nub was missing. When I first plugged in the tubes, the 12ax7's lit up, but the 6y6 and 5y3 did not. I messed around with readjusting the 5y3 and then none of the tubes lit up. I emailed the previous owner and he explained the exact placement for the 5y3 but still none of the tubes light.

My question is: is it possible that by incorrectly inserting the 5y3 that I blew something that would make none of the tubes light?

I opened it up but I couldn't see anything wrong. Not that I
really know what I am looking for.

The power light to the amp turns on.

I apologize for posting this here but I have been doing research all morning and I find nothing that gives me the answer and there are some very knowledgable people here.

Thanks, Bert
  Reply With Quote
Old 4th February 2003, 02:38 AM   #2
diyAudio Member
 
Join Date: Dec 2006
Default Danger!!

Hi,

Quote:
I opened it up but I couldn't see anything wrong. Not that I really know what I am looking for.
I am new (sort of) and I must say that the voltages are lethal inside most, if not all amplifiers. Please be very careful, the capacitors can hold voltages for quite some time and can zap you.

If your not sure what you are doing, try to find someone that lives by you and can help you. There are a lot of guys that work on guitar tube amps and that is a place to start.

Do you have a schematic? That would be nice but maybe not nescessary. Do you have a DMM tester? (digital multi meter)

The DMM could be used to check the filament wires on the 5y3's by checking continuity. If the filament is bad, ( broken, burned out) then a new/working 5y3 should be installed. Pins 2 and 8 are the filament heater wires

Could be a resistor has fried and again a DMM is handy.

Also having a tube tester is real handy for tube gear, but some times can be expensive to purchase.

There are more experienced members here and if you stick here, you'll figure it out.
  Reply With Quote
Old 4th February 2003, 12:38 PM   #3
diyAudio Senior Member
 
fdegrove's Avatar
 
Join Date: Aug 2002
Location: Belgium
Default VALCO

Hi,

Quote:
work on guitar tube amps and that is a place to start.
This is a guitar amp,isn't it?

Do you have the complete name of that model?

There may be a library on the net that has the circuit diagram.

From what I found so far it contains a fair bit of idiosyncracies.

Cheers,
__________________
Frank
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
tube amp subwoofer hum problem timolien Tubes / Valves 3 13th September 2006 01:41 PM
diy tube amp problem ectobia Tubes / Valves 4 14th June 2006 08:50 PM
Tube preamp problem @mot Tubes / Valves 20 23rd September 2004 07:50 PM


New To Site? Need Help?

All times are GMT. The time now is 12:54 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2