6h30 dac output circuit wanted..anyone?

tone · 1st February 2003, 08:21 PM

does anyone have a circuit that uses 6H30 as dac output??..
can i use one tube for both channel?
nos dac tda1541a s1.
thanks.

rgds,
tone

fdegrove · 1st February 2003, 09:36 PM

Hi,

Another nice Russky tube... if you can get it.

Quote:

can i use one tube for both channel?

In theory that should not be a problem...what kind of circuit are you looking at?

Cheers,

tone · 2nd February 2003, 04:31 AM

hi frank,
any good circuit that i can refer to?
its for a nos dac..
i can the sovtek 6h30 here..

thanks again.

rgds,
tone

fdegrove · 2nd February 2003, 10:52 AM

Hi,

First of all,let's take a look at the datasheets:

6H30

The tube has the same pinout as the ECC88/6DJ8/6922.

So for use as an output stage in a DAC you will see that is very well suited,it takes higher plate voltage than the 6922 and will have lower output impedance too.

Circuitdiagrams using this type will be extremely rare since the tube itself is so hard to come by.

However you can use existing diagrams using the 6922 family of tubes and adapt these to take the 6H30.

Have a look at it while I try to unearth some schematics for you to try.

Cheers,

fdegrove · 2nd February 2003, 02:05 PM

Hi,

Quote:

its for a nos dac..

And I assume you want to replace the output stage with one based on this 6H30 ?

This is not for the beginning DIY though...if feel up to it let me know.

Cheers,

fdegrove · 2nd February 2003, 03:29 PM

Hi,

similar question

Ciao,

tone · 2nd February 2003, 04:30 PM

hi frank,
i have no problem in building if to follow according to a circuit.

have look at the link that u have provided..thorsten circuit looks promising..guess i will follow his circuit...

so all i need is to build thorsten circuit and plug in a 6H30 tube in it..will there be any problem? ofcourse power supply is a different story..thorsten circuit uses one tube perchannel

>can i use my preamp 5687 circuit but uses 6h30 tube as dac tube output?

>thank u.

rgds,
tone

Jaap · 2nd February 2003, 06:37 PM

Perugini made this design

dhaen · 2nd February 2003, 07:02 PM

There seems to be a small problem with the volume control connections...

fdegrove · 2nd February 2003, 07:30 PM

Hi,

Quote:

There seems to be a small problem with the volume control connections...

Provided it is a volume control.

What is this circuit for,anyway?

If it was meant for a DAC than it seems incomplete to me.

Cheers,

1st February 2003, 08:21 PM	#1
tone diyAudio Member Join Date: Aug 2002 Location: Malaysia	6h30 dac output circuit wanted..anyone? does anyone have a circuit that uses 6H30 as dac output??.. can i use one tube for both channel? nos dac tda1541a s1. thanks. rgds, tone

2nd February 2003, 04:31 AM	#3
tone diyAudio Member Join Date: Aug 2002 Location: Malaysia	6h30 hi frank, any good circuit that i can refer to? its for a nos dac.. i can the sovtek 6h30 here.. thanks again. rgds, tone

2nd February 2003, 10:52 AM	#4
fdegrove diyAudio Senior Member Join Date: Aug 2002 Location: Belgium	6H30 Hi, First of all,let's take a look at the datasheets: 6H30 The tube has the same pinout as the ECC88/6DJ8/6922. So for use as an output stage in a DAC you will see that is very well suited,it takes higher plate voltage than the 6922 and will have lower output impedance too. Circuitdiagrams using this type will be extremely rare since the tube itself is so hard to come by. However you can use existing diagrams using the 6922 family of tubes and adapt these to take the 6H30. Have a look at it while I try to unearth some schematics for you to try. Cheers, __________________ Frank

2nd February 2003, 03:29 PM	#6
fdegrove diyAudio Senior Member Join Date: Aug 2002 Location: Belgium	SOME INSPIRATION HERE: Hi, similar question Ciao, __________________ Frank

2nd February 2003, 04:30 PM	#7
tone diyAudio Member Join Date: Aug 2002 Location: Malaysia	tube hi frank, i have no problem in building if to follow according to a circuit. have look at the link that u have provided..thorsten circuit looks promising..guess i will follow his circuit... so all i need is to build thorsten circuit and plug in a 6H30 tube in it..will there be any problem? ofcourse power supply is a different story..thorsten circuit uses one tube perchannel >can i use my preamp 5687 circuit but uses 6h30 tube as dac tube output? >thank u. rgds, tone


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

2nd February 2003, 07:02 PM	#9
dhaen diyAudio Moderator Emeritus Join Date: Jun 2002 Location: U.K.	There seems to be a small problem with the volume control connections...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DNM Power Amp Circuit Diagrams Wanted	mozfet	Solid State	3	29th August 2009 09:10 PM
Hepl me circuit 6h30	dia thien thai	Tubes / Valves	8	2nd December 2008 01:53 PM
Pre-Amp ...... Help wanted with Circuit	poynton	Solid State	5	19th June 2008 02:29 PM
Simple Magic Eye Circuit Wanted	poynton	Tubes / Valves	7	3rd January 2008 08:29 PM
PP EL34 circuit wanted	Norris Wilson	Tubes / Valves	3	9th August 2007 11:29 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read