Without starting an argument about the need or otherwise for a regulating the PS of headphone amp, the best approach would be a parallel regulator with a suitable series resistor, either using series zeners across the output or using the tube with a zener in its cathode and a voltage divider to its grid across the output.
Steve Bench has a series on regulators that should give you some ideas
http://members.aol.com/sbench/reg1.html
http://members.aol.com/sbench/reg1.html
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.