Dynacord MV46 as a compressor - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 30th July 2007, 09:23 PM   #1
diyAudio Member
 
Join Date: Jul 2007
Default Dynacord MV46 as a compressor

I have a vintage Dynacord MV46 tube amplifier which I use as a preamp for my Neumann U67. I really like the MV46 (follower to the Eminent) as a preamp.
My question is: Since the MV46 has two balanced mic inputs can I connect my microphone to both of the inputs and use one of the mic amplifier as a pure preamp and the other one to get saturation/compression/almost distortion?
The two mic channels are joined together in the master section of the amplifier. I use tape out as a line out from the preamp.
Do I have to make any modifications to make this work properly?
How does the impedance react when two inputs are parallelly joined together? Do I need a trafo for adjusting the impedance?
Thanks alot.
Fredrik Ekblad, Lund, Sweden
  Reply With Quote
Old 1st June 2009, 11:26 AM   #2
ronski is offline ronski  Finland
diyAudio Member
 
Join Date: Jun 2009
Hi! Just bought one too to use as mic preamp... How do you use yours, is there a line level output? And being a tube amp, doesn´t it reguire a load on the speaker outs or can you really use it without?
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dynacord CLS 222 Leslie Simulator clone DEQ+TheEnd Instruments and Amps 66 14th September 2014 07:10 PM
Dynacord eminent 100 pigsnoot Solid State 6 13th June 2009 09:55 PM
dynacord echocord s65 jaguarecho Parts 0 1st March 2009 05:01 PM
Yamaha RX-497 + 4x Dynacord DL92 GezaazY Parts 3 30th June 2007 06:01 PM
Dynacord amps? millwood Solid State 1 23rd September 2003 02:28 PM


New To Site? Need Help?

All times are GMT. The time now is 08:33 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2