• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

So, you may have been wondering...(813 Content !)

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
S

Steven-H

Member
Joined 2007
Gents,
Thanks for your help with my PSU design:
http://www.diyaudio.com/forums/showthread.php?s=&threadid=104544
In case you are wondering, it is for an 813 SE project:
An externally hosted image should be here but it was not working when we last tested it.

Granted, the schematic is rather plain-jane; but I believe it should sound OK. As for the heaters, I am going with a SS rectified/regulated circuit, again nothing earth shattering or complex. I will keep you all updated on my progress as the parts trickle in. Right now I am just waiting on the chokes for the PSU, and a couple of small parts here/there. I also need to figure out what I am going to do for a chassis...Any suggestions ??

Thanks,
Steve
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom