• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Heathkit Schematic model AA-50 needed

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I took this amp apart and carefully made a schematic as I went, and now i've lost the schematic. I cannot find this anywhere on the web. I tried to connect it from memory to no avail.

Specifically I need the schematic for the PSU; it has a 5AR4 rectifier along with 5 caps(60, 25, 40, 40, 20 [500V]). There is a 10w 1.5 kOhm wirewound resistor connected to pin 8 of the rectifier- I had connected this to the (+)terminal of the 60uF cap along with the centre-tap lines from the OPTs- assuming this was my positve volatge- am I incorrect?
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.