Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

op-points for 27 pre...?
op-points for 27 pre...?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 1st June 2007, 02:24 PM   #1
JandG is offline JandG  United States
diyAudio Member
Join Date: Jan 2005
Location: Washington State
Default op-points for 27 pre...?

I am asking for help in playing w/ differant op-points on my 27 pre. Mine has external PS slightly differant than schematic, but still retaining OA3's & running @ about 90v on plates. I have other glow reg tubes & parts to change things. The signal section is exactly as schematic except for running .47uf cap for now. I would like to try differant op-points & also wonder how to figure the battery bias for the changes. I am running 2 -AA NiMH's per 27 now. Also is it correct to run + to K & - to ground..? The Tung-Sol spec sheet shows a max of 275v plate & 90v Heater/Cathode voltage. I have a Lab grad dual output DC VIX supply that goes from 0-20v @ 2amps, & all variable if needed for anything. I bought that to experiment with DHT's, 26 & so on. Also the Tung=SOL spec sheet shows nothing higher than 11k plate resistance for the 27, why is there a 22k resistor on the plate..?Thanks for your help..

Click the image to open in full size.
  Reply With Quote


op-points for 27 pre...?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Grounding points.... flyinglemur Tubes / Valves 2 23rd February 2008 09:45 PM
crossover points ddoyle Multi-Way 1 16th December 2006 10:33 PM
4 points lt cdr data Solid State 0 20th June 2006 11:44 PM
2N5484 Op points lndm Solid State 0 9th June 2006 09:47 AM
crossover points ogp Multi-Way 1 17th January 2002 11:20 PM

New To Site? Need Help?

All times are GMT. The time now is 11:52 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio