6V6 line preamp - Page 2 - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 30th June 2007, 02:12 PM   #26
Salas is offline Salas  Greece
diyAudio Chief Moderator
 
Salas's Avatar
 
Join Date: Oct 2002
Location: Athens-Greece
Default Sad & Lonely 6SN7

The 6SN7 sitting lonely on hundreds of vinyl records listening to 6V6GT performing...
Attached Images
File Type: jpg 6sn7cascade.jpg (94.7 KB, 3411 views)
  Reply With Quote
Old 30th June 2007, 02:20 PM   #27
Salas is offline Salas  Greece
diyAudio Chief Moderator
 
Salas's Avatar
 
Join Date: Oct 2002
Location: Athens-Greece
Default Good Vibe Sentinel

Parthenon was overlooking us facing the balcony, had to be sure we keep a measure of balance in our DIY.
Attached Images
File Type: jpg parth.jpg (98.4 KB, 2425 views)
  Reply With Quote
Old 30th June 2007, 02:54 PM   #28
diyAudio Member
 
Brian Beck's Avatar
 
Join Date: Dec 2004
Location: South Florida, USA
Wow, you've got THAT outside your window? I hope that you're using Cardas Golden Ratio cables then. You don't want to make the gods angry.
__________________
Brian
  Reply With Quote
Old 30th June 2007, 03:05 PM   #29
Salas is offline Salas  Greece
diyAudio Chief Moderator
 
Salas's Avatar
 
Join Date: Oct 2002
Location: Athens-Greece
Its right across my good friend's balcony where the yesterday tests took place. Sadly I did not have a tripod with me to engage a night mode long exposure.

*Parthenon has yet another trick up its sleeve. No right angle nowhere. Its quasi right. So it looks right from underneath.
  Reply With Quote
Old 22nd July 2007, 06:52 PM   #30
Salas is offline Salas  Greece
diyAudio Chief Moderator
 
Salas's Avatar
 
Join Date: Oct 2002
Location: Athens-Greece
Default Another One

Modified mine too. He, he, now it carries the bombs! With current sourced heaters, yes Sir! Sounds mega.
Attached Images
File Type: jpg 6v6g-pre.jpg (85.0 KB, 2618 views)
  Reply With Quote
Old 22nd July 2007, 06:53 PM   #31
Salas is offline Salas  Greece
diyAudio Chief Moderator
 
Salas's Avatar
 
Join Date: Oct 2002
Location: Athens-Greece
Default And with GTs

Sylvania thingies from the Ed Wood era.
Attached Images
File Type: jpg 6v6gt-pre.jpg (84.7 KB, 3178 views)
  Reply With Quote
Old 26th July 2007, 06:50 AM   #32
diyAudio Member
 
Join Date: Dec 2004
Location: fuzhou
Send a message via MSN to foboleyns
Arrow how about this?

hello everyone!

I am sorry for my badly english (japanese is OK ), but here is a special preamp circuit for 6V6 ,maybe interesting.
Attached Images
File Type: jpg 2006119451488882.jpg (64.9 KB, 3647 views)
  Reply With Quote
Old 26th July 2007, 03:36 PM   #33
kmtang is offline kmtang  Canada
diyAudio Member
 
kmtang's Avatar
 
Join Date: Nov 2004
Location: Vancouver
Default EL84 Balance output

Hi Jane,

I don't think you can get the balance output from this output transformer. It can be only used for Single Ended output.

You need an OPT with CT.

Please correct me if I am wrong.


Johnny
  Reply With Quote
Old 26th July 2007, 04:21 PM   #34
rdf is offline rdf  Canada
diyAudio Member
 
rdf's Avatar
 
Join Date: Jun 2004
Location: big smoke
Hi foboleyns. Are you sure the part in red is correct? The output is shunted to ground by the cathode bypass.
Attached Images
File Type: jpg plate_question.jpg (29.0 KB, 3249 views)
__________________
Ears aren't microphones.
  Reply With Quote
Old 26th July 2007, 04:50 PM   #35
diyAudio Member
 
Brian Beck's Avatar
 
Join Date: Dec 2004
Location: South Florida, USA
rdf,

It looks like the output is being taken off the screen. If you look closely, the screen does not appear to be connected to the bypassed cathode; the suppressor is however.
__________________
Brian
  Reply With Quote
Old 26th July 2007, 05:03 PM   #36
rdf is offline rdf  Canada
diyAudio Member
 
rdf's Avatar
 
Join Date: Jun 2004
Location: big smoke
Thanks Brian. Right you appear to be, though I'm not any less confused about this connection.
__________________
Ears aren't microphones.
  Reply With Quote
Old 26th July 2007, 05:28 PM   #37
diyAudio Member
 
Brian Beck's Avatar
 
Join Date: Dec 2004
Location: South Florida, USA
The screen is being used as the anode. The plate is run at a very low voltage, almost turning it off. The screen's transconductance (dIc2/dEc1) will increase above its usual value when it conducts more current than the plate. The screen's dissipation is about 250mW, well below its 2 watt rating. Is all this advisable? I don't know.

I think that Steve Bench's site describes using the screen as the output anode.
__________________
Brian
  Reply With Quote
Old 26th July 2007, 06:42 PM   #38
Salas is offline Salas  Greece
diyAudio Chief Moderator
 
Salas's Avatar
 
Join Date: Oct 2002
Location: Athens-Greece
They use the screen as an anode. Somebody probably wanted to make a small tube out of a bigger one that was available. Maybe ill advised soundwise since the big current is a plus if used as a triode with output normally taken off the plate.
  Reply With Quote
Old 26th July 2007, 06:46 PM   #39
kevinkr is offline kevinkr  United States
diyAudio Moderator
 
kevinkr's Avatar
 
Join Date: Sep 2004
Location: Boston, Massachusetts
Blog Entries: 6
Default Re: EL84 Balance output

Quote:
Originally posted by kmtang
Hi Jane,

I don't think you can get the balance output from this output transformer. It can be only used for Single Ended output.

You need an OPT with CT.

Please correct me if I am wrong.


Johnny

Actually you don't need a center tap for balanced operation at all, particularly simple if the device on the other end is another transformer. Not a bad idea though to connect the chassis together through the xlr ground connection. Most transformer coupled pro gear does not use a center tap.
__________________
"Extraordinary claims require extraordinary evidence." - Carl Sagan
  Reply With Quote
Old 27th July 2007, 05:04 AM   #40
diyAudio Member
 
Join Date: Dec 2004
Location: fuzhou
Send a message via MSN to foboleyns
yes,The plate is run at a very low voltage, almost turning it off in this case,it make the 6V6 look like be close to a triode with low internal resistance.

A=5.5V is necessary,we can use a regulate circuit to make it adjustable for the output gain.
  Reply With Quote
Old 22nd October 2007, 10:04 PM   #41
diyAudio Member
 
apassgear's Avatar
 
Join Date: Nov 2002
Location: Via del Mar, Torreon
Hi Salas,

I did trip over your other thread regarding this one and inmediatly called my attention since I started to gear up for yet another tube preamp to replace the 417A that I now use which has two shot fallings, namely hi gain and hi zout used as a CC - plate follower.

Being an addict for simple topologies I had decided to build the 12b4 that has a good reputation from this thread Yet another 12B4 line stage, or is the 12B4 better than the Grounded Grid..... but also was thinking on Geeks permutation which shows an even lower zout, not that I need that since Im driving a low capacitance 47k amp input.

Im at the very beginning of this project, have ordered only the tubes so nothing stops me from changing to this very interesting line stage you have concocted.

Had you have a chance to compare the 12B4 to your 6V6? Would love to here some comments to this regard.
  Reply With Quote
Old 22nd October 2007, 10:34 PM   #42
Salas is offline Salas  Greece
diyAudio Chief Moderator
 
Salas's Avatar
 
Join Date: Oct 2002
Location: Athens-Greece
Yes, I have tried 12B4 in simple triode once. But I did not choose it as a keeper. Its precise, has impact, but its cold in my opinion. Reminds me of solid state sound somehow. This 6V6 circuit has flow and musicality, along being really big and powerful. If you can accept that it is more easy to pick up vibrations, or that some brands do expand their metals during warm up and you can hear some ding dong sounds for 2-3 minutes, I must say this is the best valve preamp I ever had by a very good margin. If you start from scratch, I highly advise you to build a sub chassis for the 2 6V6s that may be elastically decoupled from the rest of the chassis. This will save 80% of the microphonics. Another good thing with my 6V6 circuit is that it displays very practical gain for modern sources. You get a good rotation range on your volume pot. Driving tube amps or 50k input SS amps is no problem. I have tried many configurations with noval follower output stages that have better Z out on paper, but the 6V6 with 20mA driving an amp, puts you in another league.
  Reply With Quote
Old 22nd October 2007, 10:58 PM   #43
diyAudio Member
 
mod_evil's Avatar
 
Join Date: Dec 2004
Location: Rio
Send a message via MSN to mod_evil
And...

If we use a EL84 in Cathode Fallower?

Who many ohms in Zout?

Best Regards,
Felipe Navarro
__________________
My blog!
www.felipenavarro.net
  Reply With Quote
Old 22nd October 2007, 11:16 PM   #44
Salas is offline Salas  Greece
diyAudio Chief Moderator
 
Salas's Avatar
 
Join Date: Oct 2002
Location: Athens-Greece
If you triode connect an EL84 its rp drops to around 2k. If you wire it as a cathode follower, I would expect it to fall 10 times lower circa 200 Ohm. But why adding a second stage with 100% local feedback? It will steal the natural tone and the immediacy. The 6V6 here has 1.5k Zout and it drives much a bigger sound in the power amps than CF stages I had used before with 3 to 5 times lower Zout.
  Reply With Quote
Old 22nd October 2007, 11:23 PM   #45
diyAudio Member
 
mod_evil's Avatar
 
Join Date: Dec 2004
Location: Rio
Send a message via MSN to mod_evil
Its a good idea use local feedback.

I'm thinking to use ECL82 with the Pentode conected in TRIODE MODE, to drive a SENNHEISER HD580.

Best Regards,
Felipe Navarro.
__________________
My blog!
www.felipenavarro.net
  Reply With Quote
Old 22nd October 2007, 11:29 PM   #46
Salas is offline Salas  Greece
diyAudio Chief Moderator
 
Salas's Avatar
 
Join Date: Oct 2002
Location: Athens-Greece
That is a circa 300 Ohm Zload headphone?
  Reply With Quote
Old 22nd October 2007, 11:33 PM   #47
diyAudio Member
 
mod_evil's Avatar
 
Join Date: Dec 2004
Location: Rio
Send a message via MSN to mod_evil
Quote:
Originally posted by salas
That is a circa 300 Ohm Zload headphone?
I'm searching a circuit to drive a Sennheiser HD580. 300ohm Zload headphone.
__________________
My blog!
www.felipenavarro.net
  Reply With Quote
Old 22nd October 2007, 11:39 PM   #48
Salas is offline Salas  Greece
diyAudio Chief Moderator
 
Salas's Avatar
 
Join Date: Oct 2002
Location: Athens-Greece
Quote:
Originally posted by mod_evil
Its a good idea use local feedback.

I'm thinking to use ECL82 with the Pentode conected in TRIODE MODE, to drive a SENNHEISER HD580.

Best Regards,
Felipe Navarro.

In such a case I would try it. If you go down to 100-200 Ohm with such a cathode follower you may just lose 25-35% of your headphone amp gain when driving the HD 580s. Not too bad when gain is excessive anyway if there is a triode stage before the CF driven by a CD player.
  Reply With Quote
Old 23rd October 2007, 05:34 PM   #49
diyAudio Member
 
apassgear's Avatar
 
Join Date: Nov 2002
Location: Via del Mar, Torreon
Quote:
Originally posted by salas
I have tried many configurations with noval follower output stages that have better Z out on paper, but the 6V6 with 20mA driving an amp, puts you in another league.

Nice to hear your comments on this one, thanks. Ok, so 1.5 K zout, good to drive a 20K load? Or this would be asking too much like on my 417A? - anyway I think the 417 will be similar to the 12B4 sound wise even though it has a somewhat lower Zout as a CC which is not what Im looking for, I would prefer something like the 6V6 character you described.

Wonder also, if bass gets too rounded, meaning if attack gets somewhat sluggish?
Did you use AC for the heater?

Sorry, to many questions but I has looking to the newer issues from Sovteks or JJ 6V6 seems to have ribbed plates, do you have any experience with those?
  Reply With Quote
Old 23rd October 2007, 05:46 PM   #50
Salas is offline Salas  Greece
diyAudio Chief Moderator
 
Salas's Avatar
 
Join Date: Oct 2002
Location: Athens-Greece
Quote:
Originally posted by apassgear



Nice to hear your comments on this one, thanks. Ok, so 1.5 K zout, good to drive a 20K load? Or this would be asking too much like on my 417A? - anyway I think the 417 will be similar to the 12B4 sound wise even though it has a somewhat lower Zout as a CC which is not what Im looking for, I would prefer something like the 6V6 character you described.

Wonder also, if bass gets too rounded, meaning if attack gets somewhat sluggish?
Did you use AC for the heater?

Sorry, to many questions but I has looking to the newer issues from Sovteks or JJ 6V6 seems to have ribbed plates, do you have any experience with those?
- 1.5kX10=15k < 20k = OK (Better than ten fold). 22ma of cathode current counts much more in my experience vs lower Zout from a CF working with 5-10mA.

- I was listening to Pictures At An Exhibition (Wiener Phil. / Previn) just before. The double basses and tympani in The Great Gate Of Kiev left me speechless. The attack and body was elastic, majestic and instantaneous.

- LM317T current sourced heaters. One per 6V6, dedicated secondaries, bridges and caps.

- JJ's I had and eye for them, seem rugged. I did not get on a couple yet. Its I am spoiled with excellent NOS I have. I still wanna see how it does for microphony.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help me design my DAC/Line Preamp. kuroguy Tubes / Valves 7 2nd April 2009 08:31 PM
preamp line ctt richwalters Tubes / Valves 1 7th March 2008 04:34 PM
Preamp for Line In and Mic blur Instruments and Amps 1 4th January 2007 04:02 PM
Line stage preamp, based on SY's "Heretical Unity gain line stage" Danko Tubes / Valves 23 18th July 2005 04:07 AM
Line preamp for 2A3 amp Petman Tubes / Valves 0 24th May 2002 03:11 PM


New To Site? Need Help?

All times are GMT. The time now is 12:15 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2