Marshall EL34-100/100

Trepan · 4th May 2007, 04:11 PM

Anyone have the schematics for this beast?

mississippi · 4th May 2007, 04:25 PM

I have the schema of the JCM900-100. Is this what you mean?
Is that the real name of this amplifier? because I never heard of 100/100 from Marshall

Trepan · 4th May 2007, 05:27 PM

yeah it's an all tube rack-mount power amp. It's on their site under products/rack products.

They also have an EL34-50/50 and EL84-20/20, 20, 50 and 100 being the wattages. it's there twice because they are dual monoblock meant to be used as a stereo solution.

mississippi · 5th May 2007, 08:56 AM

I sent you the schema via your email.
Regards.
M

Gold_xyz · 5th May 2007, 03:16 PM

this is a guitar amp (with overdirve.. etc.etc.) or hi-fi ?

Trepan · 9th May 2007, 07:18 PM

This is a power amp for guitars. There's a switch on each channel for two different modes which could be equated to a bit of a preamp, but other than that there's not much.

The thought here is that you're going to use an effects processor to do most of that, and this just provides the raw power.

raespl · 21st December 2010, 10:24 AM

I'm interested on the amp's schematics too. Mississippi, can you post it here, plz? My email is not available on the forum for other members and don't know where to change it.
Thanks.

Gilgy · 21st December 2010, 12:24 PM

Marshall Amps Info & Schematics

I have the 50 Watt a side version, what a BEAST of an amplifier this is.

speakerfritz · 22nd December 2010, 07:37 PM

I have the 9200, 9100, which are the 6l6 version. I love the sound of these amps.

Miniwatt · 22nd December 2010, 07:39 PM

Quote:

Originally Posted by Trepan

This is a power amp for guitars. There's a switch on each channel for two different modes which could be equated to a bit of a preamp, but other than that there's not much.

The thought here is that you're going to use an effects processor to do most of that, and this just provides the raw power.

I believe the Deftones guitarist uses them. With 2 midi preamps in front of them. And LOADS of processing

4th May 2007, 04:11 PM	#1
Trepan diyAudio Member Join Date: Aug 2006	Marshall EL34-100/100 Anyone have the schematics for this beast?

5th May 2007, 03:16 PM	#5
Gold_xyz diyAudio Member Join Date: Dec 2005 Location: Italy	this is a guitar amp (with overdirve.. etc.etc.) or hi-fi ? __________________ My English originates from here

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Marshall MS-2	Andronico	Instruments and Amps	12	23rd July 2007 01:50 PM
mg 100 dsp marshall amp	topkat	Chip Amps	0	24th October 2006 10:31 PM
need help for Marshall PCB	Ahmad_tbp	Tubes / Valves	2	24th April 2006 08:19 PM
Marshall schematic ?	mtihonov	Tubes / Valves	0	24th April 2006 12:23 PM
marshall jcm hifi?	honsten	Tubes / Valves	0	9th May 2004 01:41 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

4th May 2007, 04:25 PM	#2
mississippi diyAudio Member Join Date: Apr 2006 Location: holland	I have the schema of the JCM900-100. Is this what you mean? Is that the real name of this amplifier? because I never heard of 100/100 from Marshall

4th May 2007, 05:27 PM	#3
Trepan diyAudio Member Join Date: Aug 2006	yeah it's an all tube rack-mount power amp. It's on their site under products/rack products. They also have an EL34-50/50 and EL84-20/20, 20, 50 and 100 being the wattages. it's there twice because they are dual monoblock meant to be used as a stereo solution.

5th May 2007, 08:56 AM	#4
mississippi diyAudio Member Join Date: Apr 2006 Location: holland	I sent you the schema via your email. Regards. M

9th May 2007, 07:18 PM	#6
Trepan diyAudio Member Join Date: Aug 2006	This is a power amp for guitars. There's a switch on each channel for two different modes which could be equated to a bit of a preamp, but other than that there's not much. The thought here is that you're going to use an effects processor to do most of that, and this just provides the raw power.

21st December 2010, 10:24 AM	#7
raespl diyAudio Member Join Date: Dec 2010	I'm interested on the amp's schematics too. Mississippi, can you post it here, plz? My email is not available on the forum for other members and don't know where to change it. Thanks.

21st December 2010, 12:24 PM	#8
Gilgy diyAudio Member Join Date: Oct 2009	Marshall Amps Info & Schematics I have the 50 Watt a side version, what a BEAST of an amplifier this is.

22nd December 2010, 07:37 PM	#9
speakerfritz diyAudio Member Join Date: Jul 2008	I have the 9200, 9100, which are the 6l6 version. I love the sound of these amps.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)