• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

6CJ3 rectifier or 6D22S rectifier

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I,m building a push/pull 300B amp with seperate power supply for input/driver stage 6sn7 and 300B output stage .
I was going to use 866 or 83 M/V cons out weight the pros.
Next the 5AS4 better than most 5U4,s .

Reading about the T.V. damper diodes eg.Lynn Olson and a few others .
So what are your thoughts
6CJ3 or
6D22S Svetlana

looked at the 3B28 xenon gas more RF than the M/V.
Cheers
Malcolm.
 
I,ve tried 8 different tube suppliers around the world none have 10 of the same 6CJ3,s.
different brands have different voltage drops 25v@700ma
50v@680ma
25v@350ma
Ih value 1.8
2.5
1.2
So I might go with the Svetlana 6D22S a hard valve to get pinout and ratings on.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.