I need help with my next project

djn · 14th April 2007, 05:40 AM

Hi All, I need help with a project I am working on. I use the Gold Point attenuator for my 6SN7/26/300B amp but don't like the looks of it.....not artsy enough. So I bought the Lionel transformer and am gutting it and repacking it with the Gold Point guts. So the left lever with select the inputs and the right lever with turn the volume up or down. Here is the problem: I would like to put power gauges in the front of the transformer to add to the Frankenstin look but don't know what gauges (ammeter, voltmeter or what) to use or how to wire them.....any help? Cheers.

gingertube · 17th April 2007, 04:12 AM

Meters (and some other nice goodies) can be found here:
http://www.mablexporting.com/
If you are going to add meters then have them do some thing useful - such as display the 300B idle current.
Cheers,
Ian

14th April 2007, 05:40 AM	#1
djn diyAudio Member Join Date: Oct 2004	I need help with my next project Hi All, I need help with a project I am working on. I use the Gold Point attenuator for my 6SN7/26/300B amp but don't like the looks of it.....not artsy enough. So I bought the Lionel transformer and am gutting it and repacking it with the Gold Point guts. So the left lever with select the inputs and the right lever with turn the volume up or down. Here is the problem: I would like to put power gauges in the front of the transformer to add to the Frankenstin look but don't know what gauges (ammeter, voltmeter or what) to use or how to wire them.....any help? Cheers.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CDPRO2 Group Project (open source project)	BrianGT	Digital Source	147	8th August 2008 11:37 AM
My OLD Project....... cheap tube audio project!!!	tube-lover	Tubes / Valves	4	8th May 2008 09:26 PM
first project	ceebmoj	Full Range	5	23rd January 2008 07:51 AM
My first project, cool project.	sorinsistem	Solid State	3	19th January 2006 05:08 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

17th April 2007, 04:12 AM	#2
gingertube diyAudio Member Join Date: Oct 2004 Location: Adelaide South Oz	Meters (and some other nice goodies) can be found here: http://www.mablexporting.com/ If you are going to add meters then have them do some thing useful - such as display the 300B idle current. Cheers, Ian

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)