A PT question for the TSE

[moggi1964]

So I have the chance to get one or other of the following Edcors for a very good price and I would like to know if one or other is suitable for a 300B TSE?

Thanks.

XPWR010 EDCOR XPWR010

XPWR059 EDCOR XPWR059

 

[moggi1964]

Anyone?

I promise I AM getting help to build the board so you needn't fear for my life at this point

If it helps I will have the following on the board:

James Audio 10H 200ma Choke

100uf 400V Motor Run Cap

James Audio JS-6123HS Output Transformers

Thanks.

 

[Evenharmonics]

Try this page.

 

[moggi1964]

Try this page.

I looked at those entries but almost all are for the SSE apart from the threads referencing the one you designed . I really want to have 120 and 240 windings available.

I have been reading through the notes on amplifiers written by George and I feel like 10 or the 59 should work with the 300B on an SE (they are basically the same). I tried plugging some figures into PSUD(?) but frankly it confused me even more

A nod from one of you brighter folks is all I need

 

[Evenharmonics]

Since you are in NJ, why not try Antek toroid PT? I use one and it's good despite some diy action required.

 

[moggi1964]

Since you are in NJ, why not try Antek toroid PT? I use one and it's good despite some diy action required.

When you say "DIY action"......I'll do a thread search

Thanks.

 

[Evenharmonics]

Here.

 

[moggi1964]

Thank you.

 

[moggi1964]

Decided just to go with the Edcor 131 - 120 and I'll replace it with a 131 - 240 when I move.

Sometimes best to just keep it simple, eh