Transformer hookup?

[Markman65]

I am in the final stage of my TSE build and i am trying to figure out how to wire my custom transformer to the pcb.

All the transformer hookup url links seems to be dead or to specific for a particular brand.
I am building the TSE with 300b's and using 230v input.
Could someone give me a hand?

 

[KatieandDad]

Can you post the schematic of your amp.

It seems so simple to most of us but if we can tie the transformer to the diagram I'm sure we can give you a noddy diagram of what to do.

 

[Markman65]

Hi, that would be great. It's my first project and so far the instructions were perfect.
The power transformer hook up is probably to basic to describe.
but http:// http://tubelab.com/designs/tubelab-se/schematic/ is the link to the schematic.

many thanks,
Mark

 

[KatieandDad]

That link doesn't work.

 

[Markman65]

Schematic | Tubelab

 

[apnneto]

Try this:
Schematic | Tubelab

 

[KatieandDad]

Elementary dear Watson - as Sherlock Holmes would say.

 

[Markman65]

Excellent.many thanks.
Mark

 

[KatieandDad]

No problems, glad to be of help.

 

[Markman65]

To be complete, this is how the PWT should be connected to the TSE pcb. Only use one 6,3v connection
greetings Mark

 

[mkane77g]

I'm faced with the same predicament. Using Hammond 270fx. and 45's. Guidance needed and appreciated

http://www.hammondmfg.com/pdf/EDB270FX.pdf

 

[mkane77g]

Think I have grn/r/Yel figured out . On the primary side I'm left with W/Bl/Grey. Spec sheet says White is 0- Black 125v- Grey bis 115v. Where do these wires go? How do I incorporate these into a fuse and IEC?