diyAudio (
-   Tubelab (
-   -   Volumecontrol hookup (

Green77 28th January 2013 06:12 AM

Volumecontrol hookup
Hi all!
I have used my TSE for a year now. Works greate.
I was thinking, i have a 50k step volume control at the signal input.
Is the 121k (r8) really needy when you have a volume pot?
Thanks //Daniel 28th January 2013 05:24 PM

Technically it is not needed, but it will help reduce noise if the pot has some momentary dead spots, and may save the 5842 if the pot goes open. In a perfect world with a perfect pot, the resistor can contribute some added thermal noise. In the real world you shouldn't notice it. I would leave it in there.

Green77 28th January 2013 05:33 PM

Thanks. I leave it as it is..

All times are GMT. The time now is 08:34 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2