diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubelab (http://www.diyaudio.com/forums/tubelab/)
-   -   Alps 50K: How to wire (http://www.diyaudio.com/forums/tubelab/187427-alps-50k-how-wire.html)

skipper 20th April 2011 02:35 AM

Alps 50K: How to wire
 
Hi All,

I just received my Alps 50K audio log tapper pot and do not know how to wire it. I did a search on this site and the internet and cannot find a pin out schematic. Does anyone know what the pins are?

thanks
skipper

toufu 20th April 2011 03:37 AM

Take a look at this page.

Potentiometers (Beginners' Guide to Pots)

skipper 21st April 2011 03:58 AM

Wow, what a great read!

yero 21st April 2011 05:41 AM

alps Pot
 
Just to make things simple, position the pot so the shaft is facing you. the pins from left to right are as follows. the far left pin is your signal input,the middle is your wiper which is your output and the right pin is grounded.


All times are GMT. The time now is 09:26 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2