• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

Tubelab SE (300B + Softone RW-20 OPT) Wiring

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
J

Junior

Member
Joined 2004
hi rknize,
thanks for the prompt reply.

am trying to understand your reply.

what you suggest is to split the filament #2 (3.15V-0-3.15V @9A) into 2 (filament #2 & #3).
is the picture below correct? noting that the current will be halved (filament #2 & #3).
CustomizePwrTrans2.jpg


if the split is correct as shown above, for connecting to the TSE PCB, i have to run in parallel (filament #2 & #3) with the connection as shown below. and that will sum the current to 9A.
CustomizePwrTrans3.jpg


thanks.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom